Home » Frigidaire Manuals » Cooktops » Frigidaire FFEC3025US » Manual Viewer

Frigidaire FFEC3025US Complete Owners Guide - Page 1

Frigidaire FFEC3025US Manual

View all Frigidaire FFEC3025US manuals

Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

All about the Use & Care of your Cooktop A01704202 Rev C (Oct2018) CTABLE OF CONTENTS Product Record and Registration 2 Important Safety Instructions 3 Before Setting Surface Controls 8 Setting Surface Controls 12 Care and Cleaning 16 Before You Call 18 Warranty 19 www.frigidaire.com USA 1-800-944-9044 www.frigidaire.ca Canada 1-800-265-8352

Section	Page
CTable of contents	1
Questions?	2
Record model & serial numbers here	2
Serial Plate Location	2
Need Help?	2
Visit the Frigidaire web site at www.frigidaire.com	2
Read this Use & Care Manual	2
If You Received a Damaged Cooktop...	2
Save Time and Money	2
Product Record and Registration	2
Important Safety Instructions	3
Using Proper Cookware	8
Figure 1: Testing cookware	8
Figure 2: Proper cookware	8
Cookware Material Types	8
Element On and Hot Surface Indicator Lights	10
Figure 3: Element On indicator light	10
Figure 4: Hot Surface indicator light	10
Types of ceramic cooktop elements	10
Figure 5: Single and dual elements	10
Figure 6: Quick Boil element	10
Locations of the Radiant Surface Elements	11
Figure 7: 30” 4-zone Front-Control Cooktop	11
Figure 8: 30” 5-zone Front-Control Cooktop	11
Figure 9: 36” 5-zone Front-Control Cooktop	11
Figure 10: 30” 4-zone Side-Control Cooktop	11
Figure 11: 36” 5-zone Side-Control Cooktop	11
Single radiant surface elements (all models)	12
1. Place correctly sized cookware on surface element.	12
2. Push in and turn the surface control knob in either direction (Figure 12) to the desired setting (refer to the “Suggested radiant surface element settings” in Table 1).	12
3. When cooking is complete, turn the radiant surface element OFF before removing the cookware.	12
Suggested radiant surface element settings	12
Table 1: Suggested radiant surface element settings	12
Figure 12: Single element knob	12
Dual radiant surface elements (some models)	13
1. Place correctly sized cookware on the surface element.	13
2. Push in and turn the surface control knob clockwise to begin heating both the inner and outer elements. If only the inner element is needed for smaller cookware, push in and turn the knob counter-clockwise (see Figure 13).	13
3. When cooking is complete, turn the knob to OFF before removing the cookware.	13
Figure 13: Dual element knob settings	13
Keep warm (some models)	14
1. Push in the knob and turn in either direction (see Figure 14). The temperatures are designated by hi and lo. However, the control can be set at any position between Hi and Lo for different levels of warming.	14
2. When ready to serve, turn the control to OFF. The hot surface indicator light will remain on until the warm zone cools.	14
Figure 14: Keep warm knob	14
Table 2: Recommended keep warm zone settings	14
Home Canning	15
Cooktop Maintenance	16
Figure 1: Cooktop care	16
Figure 2: Use cleaners with caution	16
Cooktop Cleaning	17
Figure 3: Cooktop cleaning	17
d Cleaning	18
Cooktop Problems	18
Before You Call	18