Frigidaire FFED3015LB Complete Owner's Guide (English) - Page 18

Setting OVEN controls - Models B & C  NOTE The oven function will not work if the time of day clock is not set. To Set the Clock When the range is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash "12:00". 1. Push CLOCK pad. 2. Within 5 seconds, push and hold the UP or DOWN ARROW pad until the correct time of day appears in the display. Note: The clock cannot be changed during any timed bake or self-clean cycle. To Set the Minute Timer 1. Push TIMER ON/OFF pad. 2. Push the UP ARROW pad to increase the time in one minute increments. Push and hold the UP ARROW pad to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes. Note: If you push the DOWN ARROW pad first, the timer will advance to 11 hours and 59 minutes. 3. The display shows the timer count down in minutes until one minute remains. The display will count down in seconds. 4. When the set time has run out, the timer will beep 3 times. It will continue to beep 3 times every 60 seconds until the TIMER ON/OFF pad is pushed.  NOTE The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other mode, the minute timer will be shown in the display. To view other functions, push the function pad for that mode. To Change the Minute Timer while it is in use: While the timer is active and shows in the display, push and hold the UP or DOWN ARROW pad to increase or decrease the time. To Cancel the Minute Timer before the set time has run out: Push TIMER ON/OFF pad.  NOTE To turn the time of day display OFF or ON in the display press and hold the CLOCK pad for 8 seconds (the control will beep once) and then release. This feature does not remove the set time of day from the memory of the control. When the display is turned OFF the time of day will reappear for a few seconds any time the CLOCK pad is touched. To Set Control for Continuous Bake or 12 Hour Energy Saving The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking. To set control for continuous baking: 1. Push and hold TIMER ON/OFF pad down for 5 seconds until tone is heard, "- - hr" will appear in display for continuous cooking. The current time of day will return to the display. 2. To cancel the Continuous Bake Function, push TIMER ON/OFF pad and hold for 5 seconds until tone is heard. "12hr" will appear in display indicating that the control has returned to the 12 Hour Energy Saving feature. To Set Control for Oven Lockout The control can be programmed to lock the oven door and inactivate the oven controls. To Set Control for Oven Lockout feature: 1. Push the CLEAR OFF pad and hold for 3 seconds. "Loc" will appear in display, the "Door Locked" indicator light will flash and the motor driven door lock will begin to close automatically. DO NOT open oven door while the indicator light is flashing. Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear in the display. 2. To cancel the lockout feature, push CLEAR OFF pad and hold for 3 seconds. The control will unlock the oven door and resume normal operation.  NOTE If a control pad is pressed while the Oven Door/Control Lockout mode, "Loc" will appear in the display until the control pad is released. But it does not disable the clock, kitchen timer and the interior oven lights. 18