Frigidaire FFEF3052TS Product Specifications Sheet - Page 3
Front
View all Frigidaire FFEF3052TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Frigidaire Baseline Freestanding Ranges FFEF3052T D / S 30" Electric Minimum 1" clearance required to nearest combustible wall on either side of range 30" min. 30" min.* 18" min. above 36" height Wall 13" max. 18" min. CL 30" 49" 36" 25" stand. 11" 22" 6" 24" 3 1/2" Shaded area allows for flush-to-wall installation of rear wall electrical outlet. (All dimensions for outlet location are maximum.) Front *Note: 30" minimum clearance between top of cooking surface and bottom of unprotected wood or metal overhead cabinet; or 24" minimum clearance when bottom of wood or metal overhead cabinet is protected 48" by not less than 1/4" flame-retardant millboard covered max. with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper. 0" clearance is minimum for rear of range. Follow all dimension requirements provided above to prevent property damage, potential fire hazard, and incorrect countertop and cabinet cuts. Side 29 1/4" 25 3/4" Power supply connection (middle bottom rear*) *when viewed from front Note: Overall product dimensions are model specific and may vary slightly from illustration. Refer to model's product specifications for actual dimensions. 36" (Adjustable to ±1/8") 29 7/8" Freestanding Range Specifications • Product Shipping Weight (approx.) - 165 Lbs. • Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz, fused on both sides of line with ground. • Connected Load (kW Rating) @ 240 / 208 Volts = 12.5 / 9.5 kW • Recommended Circuit Breaker - 40 Amps • Always consult local and national electric codes. • Make sure wall coverings around range can withstand heat generated by range. • Floor beneath range MUST be solid and level. • Overhead cabinetry should not exceed a 13" maximum depth. • Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than maximum width of appliance. • Range can be installed flush to wall with 0" minimum rear clearance. • Minimum 1" clearance required from edge of rangetop to nearest combustible wall on either side of range above 36" height. • Allow 30" minimum clearance between top of cooking surface and bottom of unprotected wood or metal overhead cabinet; or 24" minimum clearance when bottom of wood or metal overhead cabinet is protected by not less than 1/4" flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper. • To reduce risk of fire when using overhead cabinetry, install range hood that projects horizontally a recommended minimum of 5" beyond bottom of cabinets. • Follow all dimension requirements provided to prevent property damage, potential fire hazard, and incorrect countertop and cabinet cuts. Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions. USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca FFEF3052T 07/17 © 2017 Electrolux Home Products, Inc. Specifications subject to change.