Frigidaire FFET2725PB Use and Care Manual - Page 9
Setting Temperature Display in Fahrenheit or
View all Frigidaire FFET2725PB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Setting Silent Control Operation The start time key controls the Silent Control Operation feature. This feature allows the oven control to be operated without sounds or beeps if necessary. The control can be programmed for silent operation and later returned to operating with all the normal tones. To change control from normal sound operation to silent control operation: NOTE If SP appears, the control will operate with normal audible tones. If -- appears, the control is in the silent operation mode. 1. Press and hold start time for 6 seconds. A beep will sound, -- -- will appear, UPPER and DELAY will flash in the display. After 6 seconds, a beep will sound and SP will appear in the display. 2. Press up or down arrow to switch between normal sound operation and silent operation mode. 3. Press start or wait 5 seconds for the controls to accept the change. Press clear off to reject the change. Setting Continuous Bake or 12 Hour Energy Saving The timer on•off and clean keys control the Continuous Bake or 12 Hour Energy Saving Features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking. To set the control for Continuous Bake or 12 Hour Energy Saving Features: 1. Press and hold timer on•off for 6 seconds. After 6 seconds 12h or - -h will appear in the display and the control will beep once. 2. Press up or down arrow to switch between the 12 Hour Energy Saving and continuous bake features. 3. Press start or wait 5 seconds to accept the change (display will return to time of day). Press clear off to reject the change. NOTE 12h indicates the control is set for 12 Hour Energy Saving. --h indicates the control set for Continuous Bake. OVEN CONTROLS Setting Minute Timer The timer on-off key controls the minute timer and serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The minute timer can be used during any of the other oven control functions. To set the Minute Timer (example for 5 minutes) 1. Press timer on-off. -- -- will appear and TIMER will flash in the display. 2. Press the number keys to set the desired time in the display. Press start. The time will begin to count down and TIMER will stay in the display. Note: If start is not pressed the timer will return to the time of day after 25 seconds. When the time expires, End and TIMER will show in the display. The clock will sound with 3 beeps every 30 seconds until timer on-off is pressed. To cancel the Minute Timer before the set time expires, Press timer on-off. NOTE If F appears, the display is set to show temperatures in Fahrenheit. If C appears, the display is set to show temperatures in Celsius. Setting Temperature Display in Fahrenheit or Celsius The broil key control the Fahrenheit or Celsius temperature display modes. The oven has been preset at the factory to display in Fahrenheit. To change display from Fahrenheit to Celsius or Celsius to Fahrenheit: 1. To tell if the display is set for Fahrenheit or Celsius press broil and hold it for 6 seconds; 550° will appear and broil will flash in the display and a beep will sound. If F appears, the display is set to show temperatures in Fahrenheit. If C appears, the display is set to show temperatures in Celsius. 2. Press up or down arrow to switch between Fahrenheit or Celsius display modes. The display will show either F or C. 3. Press start or wait 5 seconds to accept the change or press off to reject the change. 9