Frigidaire FFFC22M6QW Complete Owner's Guide - Page 15

Light Bulb Is Not

Page 15 highlights

BEFORE YOU CALL PROBLEM CAUSE CORRECTION WATER/MOISTURE/FROST OUTSIDE APPLIANCE Moisture forms • Door may not be seating on outside. properly, causing cold air from inside to meet warm air from outside. • See "DOOR PROBLEMS". ODOR IN APPLIANCE Odor in appliance. • Interior needs to be cleaned. • Clean interior with sponge, warm water, and baking soda. • Foods with strong odors are • Cover the food tightly. in the appliance. DOOR PROBLEMS Door will not close. • Appliance is not level. It rocks on the floor when it is moved slightly. • This condition can force the cabinet out of square and misalign the door. Refer to "Leveling" in the INSTALLATION Section. • Floor is uneven or weak. • Level the floor by using wood or metal shims Appliance rocks on floor when under the appliance or brace floor supporting it is moved slightly. the appliance. LIGHT BULB IS NOT ON Power Available Light is not on • LED may be burned out. • Contact a qualified service dealer. • No electric current is reaching • See "Appliance does not run" in "APPLIANCE the appliance. OPERATION". • The door has been left open • Close the door. for more than 5 minutes. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

15
BEFORE YOU CALL
PROBLEM
CAUSE
CORRECTION
WATER/MOISTURE/FROST OUTSIDE APPLIANCE
Moisture forms
on outside.
• Door may not be seating
properly, causing cold air
from inside to meet warm air
from outside.
• See “DOOR PROBLEMS”.
ODOR IN APPLIANCE
Odor in
appliance.
• Interior needs to be cleaned.
• Foods with strong odors are
in the appliance.
• Clean interior with sponge, warm water, and
baking soda.
• Cover the food tightly.
DOOR PROBLEMS
Door will
not close.
• Appliance is not level. It
rocks on the floor when it is
moved slightly.
• Floor is uneven or weak.
Appliance rocks on floor when
it is moved slightly.
• This condition can force the cabinet out
of square and misalign the door. Refer to
“Leveling” in the
INSTALLATION
Section.
Level the floor by using wood or metal shims
under the appliance or brace floor supporting
the appliance.
LIGHT BULB IS NOT ON
Power Avail-
able Light is
not on
• LED may be burned out.
• No electric current is reaching
the appliance.
• The door has been left open
for more than 5 minutes.
Contact a qualified service dealer.
• See “Appliance does not run” in “APPLIANCE
OPERATION”.
• Close the door.