Frigidaire FFFU20F2VW Complete Owners Guide - Page 12
Controls and Settings, IMPORTANT, Cool Down Period, Appliance Control, Temperature Adjustment, Alarms
![]() |
View all Frigidaire FFFU20F2VW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 CONTROLS AND SETTINGS Cool Down Period To ensure safe food storage, allow the Appliance to operate with the door closed for at least 8 hours before loading it with food. Appliance Control NOTE When first turning appliance on, adjust control to Recommended. After 24 hours, adjust the controls as needed. IMPORTANT Adjusting the appliance temperature control to "off" turns off the compressor and prevents the appliance from cooling, but does not disconnect the power to the light bulb and other electrical components. To turn off power to your appliance, you must unplug the power cord from the wall outlet. Alarms High Temp Alert If the temperature inside the cabinet exceeds 23°F (-5°C), the LED light at the bottom of the cabinet will flash and the alarm will sound. The alarm can be reset by opening the door. The LED will continue to flash until the cabinet temperature is below 23°F (-5°C). Door Ajar Alert This alert will sound to alert you that the door has been open for 5 minutes or more. The audible alert will sound until the door is closed. Power On Light The green LED Power On light indicates that the appliance is properly connected to electrical power. The light glows even when the temperature control is turned to OFF. If the light goes out, refer to "Appliance does not run" in the SELF HELP section. Appliance Control Temperature Adjustment Adjust temperature gradually: adjust the knob in small increments, allowing the temperature to stabilize. • For colder temperatures, adjust the knob towards Coldest. • For warmer temperatures, adjust the knob towards Cold.
![](/manual_guide/products/frigidaire-fffh20f3vw-complete-owners-guide-9fb07ab/12.png)