Frigidaire FFGC3026SS Product Specifications Sheet - Page 3

Built-In Cooktops FFGC3026S S / W/ B 30" Gas ( L ) min. K for unprotected cabinet 13" max. C cabinet depth ( G ) min. between rear edge of cutout and adjacent combustible surface (or backsplash) 25" min. 24" 18" A B min. Opening to route 48" power cable & gas supply if base is present * Includes clearance needed beneath cooktop to allow for gas supply connection F * I Plywood base ( I ) min. (optional) required from E D right edge of cooktop to adjacent H ( J ) min. from combustible surface edge of cutout to front ( H ) min. required edge of countertop from left edge of cooktop to adjacent combustible surface A - Width 30" D - Width (min. - max.) 28-1/4" - 28-5/8" Product Dimensions B - Depth 21-3/4" Product Cutout Dimensions E - Depth (min. - max.) 19-3/8" - 19-3/4" C - Height 4-1/4" F - Height (min.)* 8" G (min.) 2" K - Cabinet Opening Width (min.) 30" Required Clearances H (min.) I (min.) J (min.) 12" 12" 2-1/4" L - For Utility Connection Locations Unprotected Cabinet (min.) Power Supply Gas Supply 34" Right Rear Right Rear Built-In Cooktop Specifications • Product Shipping Weight (approx.) - 45 Lbs. • Voltage Rating - 120V / 60 Hz / 15 Amps • For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation. • Amps @ 120 Volts = 1.0 • Always consult local and national electric and gas codes. • Cooktop cutout height includes clearance needed beneath cooktop to allow for gas supply connection. Recommended location for grounded 120V outlet is on rear wall in an 8"-wide by 10"-high area, positioned 22" above floor surface and 4" from right side of cooktop centerline. Access to underside of cooktop and junction box must be provided for inspection and service. • Cooktop ships with 3/4" factory regulator. • LP Gas conversion kit supplied. • Overhead cabinetry should not exceed a 13" maximum depth. • Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than 30". • Allow 34" minimum clearance between top of cooktop platform and bottom of unprotected wood or metal overhead cabinet. • Allow 2" minimum distance between rear edge of cutout and adjacent combustible surface (or backsplash). • Allow 12" minimum required clearance from left edge of cooktop to adjacent combustible surface and 12" minimum from right edge of cooktop to adjacent combustible surface. • Installation of drawer beneath cooktop requires 6-1/2" minimum clearance beneath countertop surface, and assured clearance for gas and electrical connections. • To reduce risk of fire when using overhead cabinetry, install range hood that projects horizontally a recommended minimum of 5" beyond bottom of cabinets. • Gas Drop-In Cooktop model FFGC3010Q is approved to be used over any Frigidaire® Single Wall Oven. Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions. Optional Accessories • Granite Countertop Installation Kit - (PN # 903103-9010). USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca FFGC3026S 02/16 © 2016 Electrolux Home Products, Inc. Accessories information available on the web at frigidaire.com Specifications subject to change.