Frigidaire FFGF3012TW Installation Instructions (All Languages) - Page 1

Frigidaire FFGF3012TW Manual

Page 1 highlights

30" GAS RANGE INSTALLATION INSTRUCTIONS (For gas venturi models with electric ignition) INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER. IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. FOR YOUR SAFETY: - Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. - WHAT TO DO IF YOU SMELL GAS: • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions. • If you cannot reach your gas supplier, call the fire department. - Installation and service must be performed by a qualified installer, service agency or the gas supplier. Refer to your serial plate for applicable agency certification Note: For appliances installed in the Commonwealth of Massachusetts see page 2. Clearances and Dimensions 1. Location-Check location where the range will be installed. Check for proper electrical and gas supply, and the stability of the floor. 2. Dimensions that are shown must be used. Given dimensions provide minimum clearance. Contact surface must be solid and level. Provide Proper Fuel Type Before Proceeding: Your range is preset to operate on natural gas. DO NOT attempt to convert this range to LP/ Propane settings without the proper LP/Propane conversion kit provided with the range or obtained from your dealer. Follow all instructions provided with the LP Conversion Kit. p/n 316469107 EN/SP (0810) 1 Español - Páginas 9-16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

1
30" GAS RANGE INSTALLATION INSTRUCTIONS
(For gas venturi models with electric ignition)
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Clearances and Dimensions
1.
Location—Check location where the range will be
installed. Check for proper electrical and gas supply,
and the stability of the floor.
2.
Dimensions that are shown must be used. Given
dimensions provide minimum clearance. Contact
surface must be solid and level.
Provide Proper Fuel Type
Before Proceeding:
Your range is preset to operate on
natural gas.
DO NOT
attempt to convert this range to LP/
Propane settings without the proper LP/Propane conversion
kit provided with the range or obtained from your dealer.
Follow
all instructions provided with the LP Conversion Kit.
Español - Páginas 9-16
If the information in this manual is not followed
exactly, a fire or explosion may result causing property
damage, personal injury or death.
FOR YOUR SAFETY:
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone
in your building.
Immediately call your gas supplier from a neighbor's
phone.
Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire
department.
Installation and service must be performed by a qualified
installer, service agency or the gas supplier.
Note: For appliances installed in the
Commonwealth of Massachusetts see
page 2.
Refer to your serial plate for
applicable agency certification
p/n 316469107 EN/SP (0810)