Frigidaire FFGH3054US Complete Owners Guide - Page 20
Important
View all Frigidaire FFGH3054US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
SETTING OVEN CONTROLS Setting the Clock When the appliance is first plugged in or when the power supply to the appliance has been interrupted, the display will flash 12:00. It is recommended to always set the clock for the correct time of day before using the appliance. To set the clock: 1. Press Set Clock once (do not hold clock key down). 2. Within 5 seconds, press and hold or until the correct time of day appears in the display. NOTE The clock cannot be changed when the oven is set for cooking or self clean is active. Changing between continuous bake setting or 12hour energy saving feature The oven control has a built-in 12-hour energy saving feature that will shut off the oven if the oven is left on for more than 12 hours. The oven control can be programmed to override this feature for continuous baking. To change the continuous bake setting: 1. Press and hold Timer on-off for 6 seconds until a tone sounds. - - hr will appear in the display for continuous cooking. The current time of day will return to the display. 2. To cancel the continuous bake setting, press Timer onoff and hold for 6 seconds until a tone sounds. 12 hr will appear in display indicating that the control has returned to the 12-hour energy saving feature. Temperature display (Fahrenheit/Celsius) The electronic oven control is set to operate in Fahrenheit (°F) at the factory. The oven may be programmed for any temperature from 170°F to 550°F (77°C to 287°C). To change the temperature to Celsius (°C) or from °C to °F: 1. Press Broil. - - appears in the display. 2. Press and hold until HI appears in the display. 3. Press and hold Broil until °F or °C appears in the display. 4. Press or to change °F to °C or °C to °F. To accept the change, wait 6 seconds. IMPORTANT Changing to continuous bake or 12 hour mode does not change how the cooktop controls operate. Setting a silent control panel When selecting a function, an audible tone is heard each time a key is pressed. If desired, the control can be programmed for silent operation. To set the controls for silent operation: 1. Press and hold Start Time for 6 seconds. The control will beep once and release the key. 2. The controls are now set for silent operation. To return to non-silent operation: 1. Press and hold Start Time again for 6 seconds until the control beeps once and release the key. 2. The control is now set for audible operation. 20