Frigidaire FFHB2750TD Complete Owner s Guide - Page 25
Storage Features
View all Frigidaire FFHB2750TD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
STORAGE FEATURES CAUTION To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change. Allow the glass shelves to stabilize to room temperature before cleaning. Do not wash in dishwasher. NOTE Features may vary according to model. Your refrigerator includes SpillSafeTM glass shelves that are designed to catch and hold accidental spills. You can easily adjust shelf positions in the fresh food compartments to suit your needs. The shelves have mounting brackets that attach to slotted supports at the rear of each compartment. Change the Position of a Shelf 1 Remove all food from shelf. 2 Lift the front edge up and pull the shelf out. 3 Replace by inserting the mounting bracket hooks into the desired support slots. 4 Lower the shelf and lock into position. Reposition the Air Seal For slide-out shelves & crisper shelves: 1 Remove air seal by pushing down on the flap with a downward rotation. 2 Position the air seal towards the outside end of the shelf to avoid the air tower when shelf is pushed back into place. 3 Install seal by sliding lower tab of seal up into bottom rear slot of shelf with seal at a downward angle then pulling up on seal flap until seal sits snug on back of shelf and flap sits at about a 10 degree angle from shelf surface. For slide-under shelves: 1 Remove air seal by pushing seal straight back. 2 Position the air seal towards the outside edge of the shelf to avoid the air tower when shelf is pushed back into place. 3 Install seal by sliding the open channel end of the seal onto back edge of shelf until seal sits snug on back of shelf and flap sits at about a 10 degree angle from shelf surface. IMPORTANT Be aware of the air seal located at the rear of the shelf. Shelves located on the left side should have the air seal mounted on the far left side. Shelves located on the right side should have the air seal mounted on the far right side. This is to ensure there is no interference with the large air tower on the back wall of the cabinet. This also applies to the crisper shelves. Flip Shelf Slide-Under Shelf 25