Frigidaire FFHN2750TS Complete Owner s Guide - Page 17

CONTROLS - NON-DISPENSER MODELS IMPORTANT Pressing the system on/off icon does not turn off power to your refrigerator. You must unplug the power cord from the wall outlet. An indicator light will be illuminated above most active features. Touch the icon to activate the options below. quick freeze Activates a faster rate for freezing food. quick ice Temporarily increases cooling for freezer to increase the production of ice water filter Press and hold for three seconds to reset after filter change. air filter Filter condition status is always displayed when door is open. Press and hold for three seconds to reset after filter change. C/F Touch to toggle display from Fahrenheit to Celsius. alert reset Tones emitted by each key press can be turned off based on user preference. The sounds are muted when the red indicator is lit. Warning signals will stay active. default settings Resets all refrigerator settings such as temp, temp display and tones to their factory default settings. power Press and hold for three seconds to turn off the cooling system to clean the refrigerator. The digital displays will read OFF. Setting cooling temperatures Press the ^ or v indicator to adjust the temperature to the desired setting. The temperature setting will begin to blink with the first touch. The display will time out after 10 seconds and return to the basic display. NOTE The recommended settings for a product installed in a kitchen is 37˚F for the fresh food compartment and 0˚F for the freezer. 17