Frigidaire FFHP123CS2 Complete Owners Guide - Page 25
Solution for problems
View all Frigidaire FFHP123CS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Solution for problems If your air conditioner malfunctions, check the following information to find solutions or probable causes of the failure. Do not try to repair the unit by yourself, if these solutions do not solve the failures, call your local service repair team. Poor Equipment performance 1. The air outlet or inlet of outdoor unit is obstructed. 2. The air outlet or inlet of indoor unit is obstructed. 3. The outdoor temperature is high due to direct sunlight or another heat source. 4. A heater or a cooking stove is being used in the same room. 5. The room is occupied by multiple people, thus raising the heat load. 6. The air filter is obstructed by dust or is dirty. 7. Inappropriate temperature adjustment. 8. The capacity of the equipment is not adequate for the size of the room. 9. Air conditioner was just turned on. 10.Windows or doors are open. The unit does not start 1. No power supply. 2. The voltage is not sufficient or incorrect. 3. Temperature is not adjusted properly. 4. Fuse may have blown. 5. The remote control batteries need to be replaced. 6. The time you have set with timer is incorrect. Attention!! Stop the air conditioner immediately if one of the following malfunctions occur 1. The operation indicator flashes (5 times per second) and the flashing does not stop by disconnecting the power and then restarting the unit. 2. Fuse blows frequently or circuit breaker trips frequently. (If this occurs, please contact your installer or licensed contractor). 3. Water spills over the equipment. 4. Remote control does not work. 5. Any other abnormal situations. Solution for problems 24