Frigidaire FFHP123WS2 Complete Owners Guide - Page 18

How to use the indoor unit

Page 18 highlights

How to use the indoor unit Adjusting air flow direction Adjust the air flow direction properly, otherwise it might cause discomfort or uneven room temperatures. Adjust the vertical louver using the remote controller. Adjust the horizontal louver manually. To set the horizontal air flow direction (left/ right) Adjust the horizontal louver manually using the lever on the left or right side of the vertical louver arm (Depending on the specific model you choose), or move the lever at the left (or right, or middle which is only for 2140036000 Btu's, depending on the specific model you choose) end of the air outlet to the desired position. Perform these adjustments before you start the unit because once it has been started, there is risk of your fingers getting caught on the fan. To automatically swing the air flow direction (up/down) Perform this function while the air conditioner is in operation. Press the " " button on the remote controller. To stop the function, press the " " button again. Press " " to lock louver in desired position. 17 How to use the indoor unit Lever

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

How to use the indoor unit
17
How to use the indoor unit
Adjusting air flow direction
To set the horizontal air flow
direction (left/ right)
To automatically swing the air flow
direction (up/down)
Adjust the air flow direction properly,
otherwise it might cause discomfort
or uneven room temperatures. Adjust
the vertical louver using the remote
controller. Adjust the horizontal louver
manually.
Adjust the horizontal louver manually
using the lever on the left or right side
of the vertical louver arm (Depending
on the specific model you choose),
or move the lever at the left (or right,
or middle which is only for 21400-
36000 Btu's, depending on the
specific model you choose) end of
the air outlet to the desired position.
Perform these adjustments before you
start the unit because once it has been
started, there is risk of your fingers
getting caught on the fan.
Perform this function while the air
conditioner is in operation.
Press the "
" button on the remote
controller.
To stop the function, press the "
"
button again.
Press "
" to lock louver in desired
position.
Lever