Frigidaire FFHT1514QW Complete Owner's Guide - Page 5

INSTALLATION some models To level the cabinet using the front rollers: 1 Remove the toe grille. 2 Use a flat-blade screwdriver or ⅜ inch socket wrench to raise or lower the front rollers (Figure 2). Raise  NOTE Raise the front of the refrigerator enough so the doors close freely when opened halfway. The refrigerator should slope ¼ inch to ½ inch from front-to-back. Then level the refrigerator from side-to-side. 4 Some models are equipped with an anti- tip bracket (Figure 4). Lower it clockwise until it contacts the floor. Lower Anti-tip Bracket Figure 4 (some models) Figure 2 or 3 Use adjustable wrench to adjust leveling screws. Lower the leveling screws on each side clockwise until they contact the floor (Figure 3). WARNING The anti-tip device must be installed according to the instructions in your Use & Care Manual. Failure to do so will result in injury. WARNING When reversing the door swing: You MUST move the anti-tip bracket to align with the hinges of the door. Failure to do so will result in injury. Raise Figure 3 5