Frigidaire FFHT1621QS Complete Owner's Guide - Page 5
Warning - manual
View all Frigidaire FFHT1621QS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
INSTALLATION some models To level the cabinet using the front rollers: 1 Remove the toe grille. 2 Use a flat-blade screwdriver or ⅜ inch socket wrench to raise or lower the front rollers (Figure 2). Raise NOTE Raise the front of the refrigerator enough so the doors close freely when opened halfway. The refrigerator should slope ¼ inch to ½ inch from front-to-back. Then level the refrigerator from side-to-side. 4 Some models are equipped with an anti- tip bracket (Figure 4). Lower it clockwise until it contacts the floor. Lower Anti-tip Bracket Figure 4 (some models) Figure 2 or 3 Use adjustable wrench to adjust leveling screws. Lower the leveling screws on each side clockwise until they contact the floor (Figure 3). WARNING The anti-tip device must be installed according to the instructions in your Use & Care Manual. Failure to do so will result in injury. WARNING When reversing the door swing: You MUST move the anti-tip bracket to align with the hinges of the door. Failure to do so will result in injury. Raise Figure 3 5