Frigidaire FFHT2126PQ Use and Care Manual - Page 28
CARE & CLEANING, Care and cleaning tips
View all Frigidaire FFHT2126PQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
CARE & CLEANING Care and cleaning tips Part Interior & Door Liners Door Gaskets Drawers & Bins Glass Shelves Toe Grille Exterior & Handles Exterior & Handles (Stainless Steel Models Only) Cleaning Agents • Soap and water • Baking soda and water • Soap and water Tips and Precautions • Use two tablespoons of baking soda in one quart of warm water. • Be sure to wring excess water out of sponge or cloth before cleaning around controls, light bulb or any electrical part. • Wipe gaskets with a clean soft cloth. • Soap and water • Soap and water • Glass cleaner • Mild liquid sprays • Soap and water • Mild liquid sprays • Vacuum • Soap and water • Non abrasive glass cleaner • Soap and water • Stainless steel cleaners • Use a soft cloth to clean drawer runners and tracks. • Do not wash any removable items (bins, drawers, etc.) in dishwasher. • Allow glass to warm to room temperature before immersing in warm water. • Remove toe grille (see Installation Instructions). • Vacuum both sides and wipe with sudsy cloth or sponge. Rinse and dry. • Do not use commercial household cleaners containing ammonia, bleach or alcohol to clean handles. • Use a soft cloth to clean smooth handles. • Do not use a dry cloth to clean smooth doors. • Never use CHLORIDE or cleaners with bleach to clean stainless steel. • Clean stainless steel front and handles with non-abrasive soapy water and a dishcloth. Rinse with clean water and a soft cloth. • Use a non-abrasive stainless steel cleaner. These cleaners can be purchased at most home improvement or major department stores. Always follow manufacturer's instruction. Do not use household cleaners containing ammonia or bleach. NOTE: Always clean, wipe and dry with grain to prevent scratching. • Wash the rest of the cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth. Ice Chute Extension (select models) The ice chute extension is designed to better direct ice flow into containers. Removing the Ice Chute Extension For Cleaning 1 Turn the refrigerator off using the button on the control panel (refer to the "Controls" section of this Manual). 2 Press inward firmly on the front of the chute and pull down. 3 Turn your refrigerator back on. 28 Press Here Firmly Pull Down Installing the Ice Chute Extension 1 Turn the refrigerator off using the button on the control panel (refer to the "Controls" section of this Manual). 2 Align the extension with the ice chute so that the snap clips are just inside the front edge of the chute. Push Upward Until the Extension Snaps In Place 3 Push upward until the extension snaps into place. 4 Turn your refrigerator back on.