Frigidaire FFIC3626TB Complete Owners Guide - Page 13
Important
View all Frigidaire FFIC3626TB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Induction surface cooking zones 1 P Figure 12: Induction cooking zone control To operate an induction cooking zone: 1. Place correctly sized cookware on the cooking zone. 2. Activate the cooking zone. • If the cooktop is not on, press the Main Power key. • Press the On/Off key for the desired cooking zone. If you just turned the cooktop on, this step can be skipped. 3. Set the cooking zone to the desired level (refer to the "Suggested induction cooking zone settings" in Table 1). • Place your finger on the control and slide until the desired setting is indicated. • Press P to set the zone to Power Boil. • Press 1 to set the zone to its lowest setting. 4. When cooking is complete, turn the induction cooking zone OFF by pressing its On/Off key or the Main Power key before removing the cookware. If all of the zones are off, the cooktop will automatically power off in 20 seconds. IMPORTANT Do not leave empty cookware on an operating cooking zone. Cookware will heat very quickly and may be damaged or warped if left on the cooking zone empty. NOTE The cooktop has a sensor to detect cookware in the cooking zone. The cooking zone will not become active without proper cookware in position. See "Pan Sensing" on page 10. SETTING SURFACE CONTROLS Suggested induction cooking zone settings Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. The suggested settings found in Table 1 below are based on cooking with medium-weight stainless steel pans with lids. Settings may vary when using other types of pans. Frigidaire Induction Recommendations Temp Power Range Level Description Low 1 Keep foods warm Keep Warm 145°-160°F Simmer 185 - 200°F Medium 2-4 Low Continue cooking, poach, stew Medium Medium High High Power Boil 5-6 Maintain a slow boil, thicken sauces and gravies, steaming, cooking 7-8 Continue a rapid boil, fry, or deep fry 9 Start most foods, maintain water at a boil, pan frying, searing P Start heating pans that contain large amounts of food or to bring pots of water to boil Table 1: Suggested induction cooking zone settings NOTE: • The Power Boil (P) setting is available after activating a cooking zone by pressing the P key. The cooktop will remain in Power Boil for up to 10 minutes. After 10 minutes, the cooking zone will automatically change to the High (9) setting. • The size and type of the utensil used and the amount and type of food being cooked will influence the setting needed for best cooking results. • The Hot Surface indicator (H) will show in the setting indicator when heat is detected in a cook zone that has been turned off. The indicator will remain on until the heated surface area has cooled sufficiently. 13