Frigidaire FFLE4033QT Installation Guide - Page 19

Important - review

Get Frigidaire FFLE4033QT PDF manuals and user guides View all Frigidaire FFLE4033QT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

INSTALLATION INSTRUCTIONS Connecting drain and electrical 1 Form a "U" shape on the end of the drain hose with the hose pointed toward the drain. Place the formed end in a laundry tub or a standpipe and secure the drain hose with the cable tie (provided in the enclosure package) to the standpipe, inlet hose, laundry tub, etc. so the hose does not pull out from the force of the water. NOTE The standpipe inside diameter must be 1-1/4" (3.2 cm) minimum. There must be an air gap around the drain hose in the standpipe. A snug hose fit can cause a siphoning action. IMPORTANT Check to ensure the power is off at a circuit breaker/ fuse box before plugging the power cord into an outlet. 2 Plug the power cord into a grounded outlet. Grounding type wall receptacle Do not, under any circumstances, cut, remove, or bypass the grounding prong. CABLE TIE Power cord with 3-prong grounded plug 3 Turn on the power at the circuit breaker/fuse box. 4 Read the Use & Care Guide provided with the laundry center. It contains valuable and helpful information that will save you time and money. 5 Run the washer through a complete cycle, checking for water leaks and proper operation. 6 If you have any questions during initial operation, please review the "Avoid Service Checklist" in your Use & Care Guide before calling for service. 7 Place these instructions in a location near the appliance for future reference. NOTE A wiring diagram and technical data sheet are located behind the dryer access panel. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
19
Grounding type
Grounding type
wa
wa
ll receptacl
ll receptacl
e
Po
Po
wer cord with
wer cord with
3-prong
3-prong
gr
gr
ounded plug
ounded plug
Do not,
Do not,
under
under
an
an
y cir
y cir
cumstances,
cumstances,
cut,
cut,
remo
remo
ve
ve
,
or b
or b
ypass th
ypass th
e
gr
gr
ounding pr
ounding pr
ong.
ong.
Connecting drain and electrical
CABLE TIE
1
Form a “U” shape on the end of the drain hose
with the hose pointed toward the drain. Place the
formed end in a laundry tub or a standpipe and
secure the drain hose with the cable tie (provided
in the enclosure package) to the standpipe, inlet
hose, laundry tub, etc. so the hose does not pull
out from the force of the water.
2
Plug the power cord into a grounded outlet.
3
Turn on the power at the circuit breaker/fuse box.
4
Read the
Use & Care Guide
provided with the
laundry center. It contains valuable and helpful
information that will save you time and money.
5
Run the washer through a complete cycle, checking
for water leaks and proper operation.
6
If you have any questions during initial operation,
please review the “Avoid Service Checklist” in your
Use & Care Guide before calling for service.
7
Place these instructions in a location near the
appliance for future reference.
IMPORTANT
Check to ensure the power is off at a circuit breaker/
fuse box before plugging the power cord into an outlet.
NOTE
The standpipe inside diameter must be 1-1/4” (3.2 cm)
minimum. There must be an air gap around the drain
hose in the standpipe. A snug hose
fi
t can cause a
siphoning action.
NOTE
A wiring diagram and technical data sheet are located
behind the dryer access panel.
INSTALLATION INSTRUCTIONS