Frigidaire FFMV1645TS Complete Owner s Guide - Page 24

CLEANING AND CARE Disconnect the power cord or leave the door open to deactivate the oven during cleaning. Disconnect the power cord before replacing filters and lights. Cleaning the exhaust filters The oven ventilation exhaust filters should be removed and cleaned often; generally at least once every month. Vent exhaust filter part number 5304478913 To order parts call 800-599-7569 Surface light replacement To avoid risk of personal injury or property damage, wear gloves when replacing the light bulbs. To avoid risk of personal injury or property damage, do not operate oven hood without filters properly in place. Surface lights Front 1. Unplug the microwave oven or turn off power at the main circuit breaker. 2. Remove the LED light cover mounting screw under the microwave. Tab Rear Ventilation filters 3. Remove the LED light mounting screw. 1. To remove the exhaust ventilation filters, slide the filter to the rear. Then pull filter downward and push to the other side. The filter will drop out. Repeat for the 2nd filter. 4. Unplug the LED light from the harness, replace with part 5304499540.To order parts call 800-599-7569.Then reconnect the harness. 2. Soak the ventilation filters in hot water using a mild detergent. Rinse well and shake to dry or wash in Do not use ammonia. The aluminum on the filter will corrode and darken. 3. To reinstall the exhaust ventilation filter, slide it into the side slot, then push up and toward oven to lock. Reinstall the 2nd filter using the same procedure. 24 5. Re-install LED light and mounting screw. W When re-installing mounting screw be careful not to damage the LED light. 6. Re-install LED light cover and mounting screw. 7. P lug the microwave back into the power supply or turn the power back on at the main circuit breaker.