Frigidaire FFMV164LS Installation Instructions (All Languages) - Page 13
Adapting Microwave, Blower For Outside, Exhaust
UPC - 012505561580
View all Frigidaire FFMV164LS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation Instructions A2. USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET You need to drill holes for the top support screws, a hole large enough for the power cord to fit through, and a cutout large enough for the exhaust adaptor. • Read the instructions on the TOP CABINET TEMPLATE. • Tape it underneath the top cabinet. • Drill the holes, following the instructions on the TOP CABINET TEMPLATE. CAUTION: Wear safety goggles when drilling holes in the cabinet bottom. A3. ADAPTING MICROWAVE BLOWER FOR OUTSIDE TOP EXHAUST 1 Place the microwave in its upright position, with the top of the unit facing up. 2 Carefully pull out the blower unit. The wires will extend far enough to allow you to adjust the blower unit. End B End A Back of Microwave 3 Roll the blower unit 90° so that fan blade openings are facing out the top of the microwave. Before Rotation After Rotation Back of Microwave Back of Microwave 4 Place the blower unit back into the opening. AFTER: Fan Blade Openings Facing Top Blower Plate Back of Microwave Blower Motor Screw Remove the screw that holds the blower plate to the microwave. Remove and save the screw holding the blower motor to the microwave. Back of Microwave CAUTION: Do not pull or stretch the blower unit wiring. Make sure the wires are not pinched, and that they are properly secured. 13