Frigidaire FFRA2822U2 Complete Owners Guide - Page 9

Operating Instructions (continued) REMOTE SENSING FEATURE (on some models)ğ Operating Instructions LIGHT pulsing ( On & Off intermittently ). DO THIS: PRESS REMOTE SENSING BUTTON NOTE: Unit display shows the set temperature NOTE: Remote display is actual temperature Note: This feature can be activated from the remote control ONLY, the unit must be in cool/eco mode. at remote control only To activate the remote sensing feature, point the remote control towards the unit and press the remote sensing button. Next, use the " " buttons to set the desired temperature at the remote. (Note that the set temperature will only be displayed on the unit itself ). The signal icon on the remote control will pulse each time it sends a signal. lt will periodically send this signal until the feature is deactivated by pressing the remote sensing button. lf the unit does not receive the remote sensing signal during a maximum of 200 seconds interval, the unit will end remote sensing mode automatically. The display on the remote control indicates the temperature at the remote ONLY. NOTE: The Remote Sensing function is terminated either by using the Remote Sensing button or the main ON/OFF button on the unit. FAULT CODES: If the display reads "AS", a sensor has failed. Contact your Authorized Frigidaire Service Center. If the display reads "ES", a sensor has failed. Contact your Authorized Frigidaire Service Center. If the display reads "CS", a sensor has failed. Contact your Authorized Frigidaire Service Center. TO CHANGE TEMPERATURE UNIT DISPLAY: YOU WILL SEE: DO THIS: PRESS AND HOLD THE UP/DOWN BUTTONS TOGETHER FOR 3 SECONDS 2009 Electrolux Home Products, Inc. Note: The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. All rights reserved. 9