Frigidaire FFRG4120SW Use and Care Guide - Page 10
Cycle Settings, Cycle Options
View all Frigidaire FFRG4120SW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
OPERATING INSTRUCTIONS Cycle Settings Cycle Options Select appropriate drying temperature and dryness level settings suitable for each load. Make selections based on load size, dampness and fabric type and durability. The settings can be changed before the cycle is started. If changes are attempted after the cycle starts, the lights will flash and a signal will beep, but the cycle will continue. NOTE To change the temperature or dryness level once the cycle has begun, press the PAUSE button, make the new selection and press START again. Drying Temperature To change the preset temperature on Manual Dry cycles, press the Temp button to scroll to the desired setting. NOTE To protect your fabrics and save energy, temperature levels are preset on Sensor cycles and cannot be adjusted. Max Recommended for towels, heavy duty loads, and durable fabrics. High Recommended for most cotton fabrics. Medium Recommended for wrinkle free, easy care, lightweight fabrics and bulky loads. Low Recommended for knits and delicate fabrics. Air Dry The Air Dry setting tumbles the load without heat. Use this setting to dry items containing feathers, down, foam rubber, plastics or rubber-like materials. To select an option, press the corresponding option button to illuminate the desired option. To deselect an option, press the option button again and the indicator light will turn off. Not all options are available on every model. To protect your fabrics, not all options are available with every cycle. If an option is not appropriate for the cycle, the indicator will not light. NOTE To change options once the cycle has begun, press the PAUSE button, make the new selection and press START again. Wrinkle Release Select Wrinkle Release if the dried load might not be removed promptly at the end of the cycle. The dry load will continue tumbling without heat to help reduce wrinkling. When Chime is selected, a beep will be heard periodically. The load may be removed any time during Wrinkle Release. Chime A signal will sound at the end of the cycle (and periodically during Wrinkle Release) if this option is selected. Dryness Level To change the preset level, press the Dryness button to scroll to the degree of dryness desired. Occasionally a load may seem too damp or over-dried at the end of the cycle. To increase drying time for similar loads in the future, select Max or High. For loads requiring less drying time, select Low. Select Damp for items you wish to partially dry before hanging or ironing. 10