Frigidaire FFSS2315TE Complete Owner s Guide - Page 11
Handle Installation - review
View all Frigidaire FFSS2315TE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
HANDLE INSTALLATION CAUTION Wear gloves and safety goggles and use extreme CAUTION when installing these handles. The rounded end of the handles may be sharp (some models). IMPORTANT To ensure proper installation of handles, please review these instructions and illustrations thoroughly prior to installing the handles. 1 Remove handles from carton and any other protective packaging. 2 Position freezer handle end caps over upper and lower pre-installed shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing towards the refrigerator door. 3 While holding handle firmly against door, fasten upper and lower Allen set screws (B) with supplied Allen wrench. 4 Repeat steps 2 and 3 to install refrigerator handle. Ensure the holes for the set screws are facing towards the freezer door. NOTE All set screws should be tightened and sub-flush (Allen set screw should be seated just below the surface of the end cap) of handle end cap. The end caps should be drawn tight to freezer and refrigerator doors with no gaps. Freezer Upper End Cap Refrigerator Upper End Cap Door Door Ensure Handle Set Screws are Facing Each Other with Doors Closed Door Door Freezer Lower End Cap Refrigerator Lower End Cap 11