Frigidaire FFTA1033S1 Installation Instructions - Page 10
Trim Kit Installation Instructions
View all Frigidaire FFTA1033S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation Instructions Trim Kit Installation Instructions 1. Install the 1" x 1" x 84" long stuffer seal between the wall sleeve and the unit. A flat-bladed screwdriver or putty knife is recommended. 2. Assemble the trim frame by inserting the top and bottom pieces into side pieces and snapping into place. 3. Pull the cord through the trim frame and slide the trim over the unit until flush with the wall. NOTE: For larger sleeves, an accessory kit is available (EA120T) Energy Saving Suggestion: In order to reach the maximum energy saving and comfort, it is recommended to use an appropriately sized cover to provide additional insulation and air sealing when the unit is not in use during the off-season. The size of the unit front panel is 24.2" x 14.6" x 2" (W x H x D), so the size of the cover should be 0.3"~0.5"larger than each dimension of the unit front panel to facilitate satisfactory fit. 10