Frigidaire FFTR1425VW Product Specifications Sheet - Page 3

Top View - model

Page 3 highlights

Top Mount Refrigerator - 18 Cu. Ft. Baseline Q 2014 Top Freezer Refrigerator FFTR1425VW 13.9 Cu. Ft. Top View Recessed water line Recessed (ice maker models only) electrical outlet Allow 1-1/4"" min. clearance at back for proper air circulation and water / electrical connections Allow 1-5/8" min. clearance at sides and 4" at top for ease of installation and proper air circulation When installing directly adjacent to wall, sufficient handle clearance required where handle may make contact with wall, to allow for 90° door opening* * When installing refrigerator adjacent to wall, cabinet or other appliance that extends beyond front edge of unit, 24" minimum clearance recommended to allow for optimum 120° door swing, providing complete crisper access and removal. (Absolute 3" minimum clearance will ONLY allow for 90° door swing which will provide limited crisper access with restricted removal.) 29 3/8" 27 5/8" 59 7/8" with rollers 60 1/2" with rollers Water line inlet location (left bottom rear) 25 1/4" Power cord location (right bottom rear) Allow 54" min. (with doors 90° open) Top Mount Refrigerator Specifications • Product Shipping Weight (approx.) - 135 Lbs. • An electrical supply with grounded three-prong receptacle is required. The power supply circuit must be installed in accordance with current edition of National Electrical Code (NFPA 70) and local codes & ordinances. • Voltage Rating - 120V / 60 Hz / 15 Amps • Max Connected Load (kW Rating) @ 120 Volts = .36kW • Max Amps @ 120 Volts = 3.0 Amps • Always consult local and national electric & plumbing codes. • Floor should be level surface of hard material, capable of supporting fully loaded refrigerator. • To ensure optimum performance, do not install in areas where temperature drops below 55° F or rises above 110° F and avoid installing in direct sunlight or close proximity to range, dishwasher or other heat source. • For proper ventilation, front grille MUST remain unobstructed. • Recess electrical outlet when possible. • Optional Ice Maker Kit (PN # IM117) available for installation in ice maker-ready models only. • Water recess on rear wall recommended to prevent water line damage. • Water Pressure - Cold water line must provide between 30 and 100 pounds per square inch (psi). • Copper tubing with 1/4" O.D. recommended for water supply line with length equal to distance from rear of unit to household water supply line plus 7 additional feet. Optional Water Supply Installation Kits available. Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions. Optional Accessories • Ice Maker Kit - (PN # IM117). USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca FFTR1425V 02/19 © 2019 Electrolux Home Products, Inc. Specifications subject to change.

  • 1
  • 2
  • 3

Specifications
subject to change.
USA
10200 David Taylor Drive
Charlotte, NC 28262
1-800-FRIGIDAIRE
frigidaire.com
CANADA
5855 Terry Fox Way
Mississauga, ON L5V 3E4
1-800-265-8352
frigidaire.ca
FFTR1425V 02/19
© 2019 Electrolux Home Products, Inc.
Top Mount Refrigerator Specifications
Product Shipping Weight (approx.) – 135 Lbs.
An electrical supply with grounded three-prong receptacle is
required. The power supply circuit must be installed in accordance
with current edition of National Electrical Code (NFPA 70) and
local codes & ordinances.
Voltage Rating – 120V / 60 Hz / 15 Amps
Max Connected Load (kW Rating) @ 120 Volts = .36kW
Max Amps @ 120 Volts = 3.0 Amps
Always consult local and national electric & plumbing codes.
Floor should be level surface of hard material, capable of supporting
fully loaded refrigerator.
To ensure optimum performance, do not install in areas where
temperature drops below 55° F or rises above 110° F and
avoid installing in direct sunlight or close proximity to range,
dishwasher or other heat source.
For proper ventilation, front grille MUST remain unobstructed.
Recess electrical outlet when possible.
Optional Ice Maker Kit (PN # IM117) available for installation in
ice maker-ready models only.
Water recess on rear wall recommended to prevent water line damage.
Water Pressure – Cold water line must provide between 30 and 100
pounds per square inch (psi).
Copper tubing with 1/4" O.D. recommended for water supply line
with length equal to distance from rear of unit to household water
supply line plus 7 additional feet. Optional Water Supply Installation
Kits available.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Optional Accessories
Ice Maker Kit – (PN # IM117).
Top View
Allow 1-1/4"" min. clearance at
back for proper air circulation
and water
/
electrical connections
Allow 1-5/8" min. clearance at
sides and 4" at top for ease of
installation and proper air
circulation
Recessed water line
(ice maker models only)
Recessed
electrical outlet
* When installing refrigerator adjacent to wall,
cabinet or other appliance that extends beyond front
edge of unit, 24" minimum clearance recommended
to allow for optimum 120
°
door swing, providing
complete crisper access and removal.
(Absolute
3" minimum clearance will ONLY allow for 90
°
door
swing which will provide limited crisper access
with restricted removal.)
When installing directly
adjacent to wall, sufficient
handle clearance required
where handle may make
contact with wall, to allow
for 90
°
door opening*
27
5
/
8
"
Power
cord
location
(right
bottom
rear)
Water
line inlet
location
(left
bottom
rear)
Allow 54"
min.
(with doors 90
°
open)
29
3
/
8
"
25
1
/
4
"
59
7
/
8
"
with
rollers
60
1
/
2
"
with
rollers
Top Freezer Refrigerator
FFTR1425VW
13.9 Cu. Ft.