Frigidaire FFTR1814TB Complete Owner s Guide - Page 7
Door Removal/reversal Instructions
View all Frigidaire FFTR1814TB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
DOOR REMOVAL/REVERSAL INSTRUCTIONS Tools Necessary: or PhillipsTM Head Socket Wrench Set Adjustable Wrench or 3/8" (10mm) Fixed Wrench Top Hinge Cover Front Screw Top Hinge Cover Rear Screw Top Hinge Screw Bottom Hinge Screw Door removal and reversal instructions: 1. Remove toe grille. 2. Remove top hinge cover. Trace around the hinge with a soft lead pencil. This makes reinstallation easier. Remove top hinge and lift door off center hinge pin. Set door aside. NOTE The direction in which your refrigerator doors open (door swing) can be reversed, from left to right or right to left, by moving the door hinges from one side to the other. Reversing the door swing should be performed by a qualified person. IMPORTANT Before you begin, turn the refrigerator temperature control to "0" and remove the electrical power cord from the wall outlet. Remove any food from door shelves. Door Stop Screw Door Stop Washer Shim Hinge Pin Center Hinge Top Hinge Cover Hinge Hole Plug Screws Handle Hole Plug Top Hinge 7. Remove two screws on bottom hinge with ⅜" socket wrench. 8. Install bottom hinge on opposite side with the two screws removed from step 7. 3. Unscrew center hinge pin using adjustable wrench and save for reassembly. Ensure plastic washer stays on hinge pin. 4. Lift refrigerator door off of bottom hinge and set aside. 5. Remove center hinge and shim by removing inside screw and loosening two outside screws enough to allow hinge and shim to slide out. Tighten screws. 6. Loosen two outside screws on opposite side of refrigerator, remove inside screw and install center hinge. Door Stop Screw Door Stop Washer Hinge Pin Bottom Hinge Screws Toe Grille 7