Frigidaire FFTR1814TW Complete Owner s Guide - Page 6
To level the cabinet using the front, rollers
View all Frigidaire FFTR1814TW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
INSTALLATION To level the cabinet using the front rollers: 1 Remove the toe grille. 3 Use adjustable wrench to adjust leveling screws. Lower the leveling screws on each side clockwise until they contact the floor (Figure 3). Do not raise the cabinet more than 9/16 inch. 9/16" Max 2 Use a flat-blade screwdriver or ⅜ inch socket wrench to raise or lower the front rollers (Figure 2). Do not raise the cabinet more than 9/16 inch. Raise Raise Figure 3 NOTE Raise the front of the refrigerator enough so the doors close freely when opened halfway. The refrigerator should slope ¼ inch to ½ inch from front-to-back. Then level the refrigerator from side-to-side. 9/16" Max Figure 2 or 6
6
NOTE
Raise the front of the refrigerator enough so
the doors close freely when opened halfway.
The refrigerator should slope ¼ inch to
½ inch from front-to-back. Then level the
refrigerator from side-to-side.
To level the cabinet using the front
rollers:
1 Remove the toe grille.
Raise
9/16"
Max
Figure 3
9/16"
Max
Raise
Figure 2
or
3 Use adjustable wrench to adjust leveling
screws. Lower the leveling screws on each
side clockwise until they contact the floor
(Figure 3). Do not raise the cabinet more
than
9
/
16
inch.
INSTALLATION
2
Use a flat-blade screwdriver or ⅜ inch
socket wrench to raise or lower the front
rollers (Figure 2). Do not raise the cabinet
more than
9
/
16
inch.