Frigidaire FFTR1835VB Complete Owners Guide - Page 10

10 DOOR REMOVAL Tools Necessary: Phillips™ Head and Flat Head Screwdriver Socket Wrench Set or Adjustable Wrench or 5/16" (8mm) Fixed Wrench Center Hinge Top Hinge Screw MSX16 Quadrex Pan Head Quadrex MSX12 Hammer Door Removal/Reversal (some models) CAUTION Be sure the doors are set aside in a secure position where they cannot fall and cause personal injury. 3. Using a 5/16 in. socket, loosen the 3 screws from the top hinge (see Figure 2).  NOTE The direction in which your refrigerator doors open (door swing) can be reversed, from left to right or right to left, by moving the door hinges from one side to the other. Reversing the door swing should be performed by a qualified person. IMPORTANT Before you begin, turn the refrigerator temperature control to OFF and remove the electrical power cord from the wall outlet. Remove any food from door shelves. 1. Unplug your refrigerator. 2. Remove the top hinge cover (some models--see Figure 1A). For models without the hinge cover, go to step 3. A B Figure 1 Figure 2 4. Carefully open the freezer door. Lift the loosened the top hinge and lift the door off of center hinge pin. Set the door aside.  NOTE * We do not recommend to using an electric tool to unscrew and screw parts because it may damage the screw threads or cause screw heads to be stripped off. However, if you have an electric tool with torque control, the torque cannot be larger than 6 N·m (53 in.lb).  NOTE Keep the screws so they can be used on the opposite side.