Frigidaire FFVU17F4QW Complete Owner's Guide - Page 12

Problem, Cause, Correction

Page 12 highlights

BEFORE YOU CALL PROBLEM CAUSE CORRECTION Longer sound • Appliance operates at higher levels when pressures during the start of compressor the ON cycle. comes on. • This is normal. Sound will level off or disappear as appliance continues to run. Popping or • Metal parts undergo • This is normal. Sound will level off or cracking sound expansion and contraction, as disappear as appliance continues to run. when compres- in hot water pipes. sor comes on. Bubbling • Refrigerant (used to cool or gurgling the appliance) is circulating sound, like throughout the system. water boiling. • This is normal. Vibrating or • Appliance is not level. It rocks • Level the unit. Refer to "Leveling" in the First rattling noise. on the floor when it is Steps Section. moved slightly. • Floor is uneven or weak. • Ensure floor can adequately support appliance. Level the appliance by putting wood or metal shims under part of the freezer. • Appliance is touching the wall. • Re-level the appliance or move appliance slightly. Refer to "Leveling" in the First Steps Section. Alarm is sounding from the control panel • Look on the control panel to determine which indicator light is on (High Temp, Power Fail, or Door Ajar). • Press the "set" button to acknowledge the alarm or close the door if the door ajar indicator is shown. WATER/MOISTURE/FROST INSIDE APPLIANCE Moisture • Weather is hot and humid. forms on inside appliance walls. • Door is opened too often or too long. • This is normal. • Open door less often. ODOR IN APPLIANCE Odor in appli- • Interior needs to be cleaned. • Clean interior with sponge, warm water, and ance. baking soda. • Foods with strong odors are • Cover the food tightly. in the appliance. LIGHTING PROBLEMS Light bulb is • No electric current is reaching • See "APPLIANCE DOES NOT RUN". not on. the appliance • Control is in Sabath mode (Sb • Depress TEMP MODE key and CONTROL LOCK is displayed on control) key for 3 seconds. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

12
PROBLEM
CAUSE
CORRECTION
Longer sound
levels when
compressor
comes on.
• Appliance operates at higher
pressures during the start of
the ON cycle.
• This is normal. Sound will level off or
disappear as appliance continues to run.
Popping or
cracking sound
when compres-
sor comes on.
• Metal parts undergo
expansion and contraction, as
in hot water pipes.
• This is normal. Sound will level off or
disappear as appliance continues to run.
Bubbling
or gurgling
sound, like
water boiling.
• Refrigerant (used to cool
the appliance) is circulating
throughout the system.
• This is normal.
Vibrating or
rattling noise.
• Appliance is not level. It rocks
on the floor when it is
moved slightly.
• Floor is uneven or weak.
• Appliance is touching
the wall.
• Level the unit. Refer to ”Leveling” in the
First
Steps
Section.
Ensure floor can adequately support appliance.
Level the appliance by putting wood or metal
shims under part of the freezer.
• Re-level the appliance or move appliance
slightly. Refer to “Leveling” in the
First
Steps
Section.
Alarm is
sounding
from the con-
trol panel
• Look on the control panel to
determine which indicator
light is on (High Temp, Power
Fail, or Door Ajar).
• Press the “set” button to acknowledge the
alarm or close the door if the door ajar
indicator is shown.
WATER/MOISTURE/FROST INSIDE APPLIANCE
Moisture
forms on in-
side appliance
walls.
• Weather is hot and humid.
• Door is opened too often or
too long.
• This is normal.
• Open door less often.
ODOR IN APPLIANCE
Odor in appli-
ance.
• Interior needs to be cleaned.
• Foods with strong odors are
in the appliance.
• Clean interior with sponge, warm water, and
baking soda.
• Cover the food tightly.
LIGHTING PROBLEMS
Light bulb is
not on.
• No electric current is reaching
the appliance
• Control is in Sabath mode (Sb
is displayed on control)
• See “APPLIANCE DOES NOT RUN”.
• Depress TEMP MODE key and CONTROL LOCK
key for 3 seconds.
BEFORE YOU CALL