Frigidaire FGEF300DNB Installation Instructions (English, Español, Fr - Page 3

30" ELECTRIC RANGE INSTALLATION INSTRUCTIONS C. Level and position the range - Slide range to its final position. Insert the range leveling leg in the anti-tip bracket. Visually verify if the anti-tip bracket is engaged. Lower the range by adjusting the 4 leveling legs alternatively until the range is level. Check if the range is level by placing a spirit level on the oven rack. Take 2 readings with the spirit level placed diagonally; take a reading in one direction and then in the other direction. Level the range if necessary by adjusting the leveling legs. Range side Figure 3 Range Leveling Leg Anti-Tip Bracket To check if the anti-tip bracket is installed properly, use both arms and grasp the rear edge of range back. Carefully attempt to tilt range forward. When properly installed, the range should not tilt forward. 4. Serial Plate Information The serial plate is located as shown. See the serial plate for the following information: A. Model, lot and serial number of range. B. Kilowatt rating (power requirements). C. Voltage ratings. Figure 4 Figure 6 Leg Leveler Raise Lower Figure 5 3