Frigidaire FGET2766UF Installation Instructions - Page 8

Single Wall Ovens - Side-by-side Installation

Get Frigidaire FGET2766UF PDF manuals and user guides View all Frigidaire FGET2766UF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS (with side-by-side and cooktop combination specialty installations) SINGLE WALL OVENS - SIDE-BY-SIDE INSTALLATION Do not remove spacers (if equipped) on the side walls of the built-in oven. These spacers center the oven in the space provided. The oven must be centered to prevent excess heat buildup that may result in heat damage or fire. 1½" (3.8 cm) I Min. C G H G Hole for B 27 1/4" JF Cord (69.2 cm) 31"* (78.7 cm) 3" (7.6 cm) Door Open (see note 2) D Spacer A 2" (5.1 cm) Min. 2" (5.1 cm) NOTES: Min. Electrical 1. Each wall oven must be installed in a separate, Junction Box complete cabinet. Do not install a side by side configuration under countertops. Do not install a 2" (5 cm) Wide Wood Spacer if Needed cooktop over a side-by-side installation. 2. Each base must be capable of supporting 150 pounds (68 kg) for 27" models and 200 pounds (90 kg) for 30" models. 3. Allow at least 21" (53.3 cm) clearance in front of oven for door depth when it is open, and 1" of space between two oven doors. 5. For a cutout height greater than the maximum (H), add one 2"(5 cm) wide wood shim of appropriate height to each side of the opening under the appliance side rails. You can order a larger bottom trim through a Service Center. 4. Dimension G (cutout depth) is critical to the proper installation of the built-in oven. If the oven trim does not butt against the cabinet, or if noise is heard on * Suggested distance from floor is 31" (78.7cm). Minimum required distance is 4 ½" (11.4cm). convection models, verify dimension G to assure it is the required depth. Figure 9. 27" and 30" Wall Ovens (Side by Side) PRODUCT DIMENSIONS MODEL A B C D 27" (68.6 cm) 30" (76.2 cm) MODEL 27 (68.6) 291/2 (74.9) 245/8 (62.5) 30 (76.2) 29 (73.7) 281/4 (71.8) CUTOUT DIMENSIONS AND CABINET WIDTH F G H **Others, see notes 4 & 5 Min. Max. Min. Min. Max. 243/4 (62.9) 243/4 (62.9) I J 27" (68.6 cm) 30" (76.2 cm) 247/8 (63.2) 281/2 (72.4) 25¼ (64.1) 29 (73.7) 24 (61.0) 27¼ (69.2) 27¼ (69.2) 281/4 (71.8) 283/8 (72.1) Min 31/8 (7.9) Min 281/8 (71.4) 311/2 (80) Min 21/2 (6.4) Min All dimensions are in inches (cm). 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
8
ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
(with side-by-side and cooktop combination specialty installations)
Figure 9.
27" and 30" Wall Ovens (Side by Side)
G
2”
(5.1 cm)
Min.
F
I
G
2”
(5.1 cm)
Min.
H
31”*
(78.7 cm)
1½” (3.8 cm)
Min.
3”
(7.6 cm)
B
A
D
C
27 1/4”
(69.2 cm)
J
2" (5 cm) Wide Wood
Spacer if Needed
Door Open
(see note 2)
Electrical
Junction Box
Hole for
Cord
Spacer
Do not remove spacers (if equipped) on the side walls of the built-in oven. These spacers
center the oven in the space provided. The oven must be centered to prevent excess heat buildup that may
result in heat damage or fire.
SINGLE WALL OVENS - SIDE-BY-SIDE INSTALLATION
All dimensions are in inches (cm).
NOTES:
1. Each wall oven must be installed in a separate,
complete cabinet. Do not install a side by side
configuration under countertops. Do not install a
cooktop over a side-by-side installation.
2. Each base must be capable of supporting 150
pounds (68 kg) for 27" models and 200 pounds (90
kg) for 30" models.
3. Allow at least 21" (53.3 cm) clearance in front of
oven for door depth when it is open, and 1" of space
between two oven doors.
4. Dimension G (cutout depth) is critical to the proper
installation of the built-in oven. If the oven trim does
not butt against the cabinet, or if noise is heard on
convection models, verify dimension G to assure it is
the required depth.
5. For a cutout height greater than the maximum (H),
add one 2"(5 cm) wide wood shim of appropriate
height to each side of the opening under the
appliance side rails. You can order a larger bottom
trim through a Service Center.
* Suggested distance from floor is 31" (78.7cm).
Minimum required distance is 4 ½" (11.4cm).
PRODUCT DIMENSIONS
MODEL
A
B
C
D
27" (68.6 cm)
27 (68.6)
29
1
/
2
(74.9)
24
5
/
8
(62.5)
24
3
/
4
(62.9)
30" (76.2 cm)
30 (76.2)
29 (73.7)
28
1
/
4
(71.8)
24
3
/
4
(62.9)
CUTOUT DIMENSIONS AND CABINET WIDTH
F
G
H
**Others, see notes 4 & 5
I
J
MODEL
Min.
Max.
Min.
Min.
Max.
27" (68.6 cm)
24
7
/
8
(63.2)
25¼ (64.1)
24 (61.0)
27¼ (69.2)
28
1
/
4
(71.8)
28
3
/
8
(72.1) Min
3
1
/
8
(7.9) Min
30" (76.2 cm)
28
1
/
2
(72.4)
29 (73.7)
27¼ (69.2)
28
1
/
8
(71.4)
31
1
/
2
(80) Min
2
1
/
2
(6.4) Min