Frigidaire FGF328GS Installation Instructions (All Languages) - Page 6
Assembly of the Surface Burner Heads, Burner, Caps and Burner Grates - model
UPC - 012505543661
View all Frigidaire FGF328GS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
30" GAS RANGE INSTALLATION INSTRUCTIONS (For Models with Sealed Top Burners) PLEASE READ CAREFULLY! For personal safety, this product must be properly grounded. Grounding Instructions The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong grounding wall receptacle to minimize the possibility of electric shock hazard from this appliance. The customer should have the wall receptacle and circuit checked by a qualified electrician to make sure the receptacle is properly grounded and polarized. 6. Assembly of the Surface Burner Heads, Burner Caps and Burner Grates: It is very important to makes sure that all of the Surface Burner Heads, Surface Burner Caps and Surface Burner Grates are installed correctly and in the correct locations (See Fig. 1). 1. Match the letter located under center of Burner Cap with letters located inside the Burner Heads (See Fig. 1). 2. Match the letter stamped on the Burner Skirt with the Burner Head and Burner Cap. Each of the Burner Heads MUST have a Burner Cap installed to insure proper ignition and gas flame size. Note: The Burner Electrodes must be located properly in slot of each Burner Head (See Fig. 2). Burner Assembly Where a standard two-prong wall receptacle is encountered, it is the personal responsibility and obligation of the customer to have it replaced with a properly grounded three-prong wall receptacle. DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD. Burner sizes and locations Fig. 2 Fig. 1 6 Front of cooktop