Frigidaire FGF368GB Complete Owner's Guide (English) - Page 7

Oven Control Functions

7

Setting Oven Controls

*Note: The

OVEN

indicator light on the electronic display

will turn ON & OFF when using the Bake feature & during

preheat. This is normal & indicates that the oven is cycling

to maintain the selected baking temperature. When the

preheat indicator light turns OFF, your oven is ready.

For a silent control panel

When choosing a function, a beep will be heard each time a

pad is pressed. If desired, the control can be programmed

for silent operation. Press and hold

. After 7 seconds,

the control will beep once. This will block the controls from

sounding when a pad is pressed. To return the sound, press

and hold

again for 7 seconds until the control beeps

once.

NOTE:

To turn the

time of day

display

OFF

or

ON

in the display press

and hold for 15 seconds (the control will beep

once) and then release. This feature does not remove the set time of day from the memory of the control. When the display

is turned OFF the time of day will re-appear for a few seconds any time the

pad is touched.

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.

For satisfactory use of your oven, become familiar with

the various pad functions of the oven as described below.

BROIL PAD

— Used to

select the variable broil

function.

UP and DOWN ARROW PADS

— Used along

with the function pads to select oven

temperature, cook time, start time (when

programming an automatic start time), time

of day, clean time and minute timer.

BAKE PAD

—Used

to select the bake

function.

SELF-CLEAN PAD

—

Used to select the Self-

Cleaning cycle. A 2 or 3

hour Self-Clean time may

be selected.

OVEN, PREHEAT & DOOR LOCKED LIGHTS*

— The

"OVEN" light

will glow each time the oven turns on to maintain the set oven

temperature. The

"PREHEAT" light

will glow when the oven is first

set to operate, or if the desired temperature is reset higher than the

actual oven temperature. The

"DOOR LOCKED" light

will flash

when the oven door locks and unlocks or when using the Self-

Clean cycle or the oven door lockout is activated.

FEATURE INDICATOR LIGHTS

—

These light to show which feature

is in use.

CLOCK PAD

— Used

to set the time of day.

CLEAR/OFF PAD

— Used to clear

any function previously entered

except the time of day and minute

timer. Press

CLEAR/OFF

to stop

cooking. Also the

CLEAR/OFF

pad

is used to activate oven door lockout

setting.

TIMER ON/OFF

PAD

— Used to set or

cancel the minute

timer. The minute timer

does not start or stop

cooking. Also,

TIMER ON/OFF

pad is

used to set the

Continuous Bake

feature.

START TIME PAD

— Used

to set the desired start time

for baking & Self-Clean.

May be used with

BAKE

TIME

to program a delayed

bake cycle.

BAKE TIME

PAD

— Used to

enter the length of

the baking time.

Temperature conversion

The electronic oven control is set to operate in °F

(Fahrenheit) when shipped from the factory. The oven can be

programmed for any temperature from 170°F to 550°F (77°C

to 287°C).

To change the temperature to °C (Celsius) or from °C to

°F (control should not be in a Bake or Clean mode):

1.

Press

. "— —" appears in the display.

2.

Press and hold the

until "HI" appears in the

display.

3.

Press and hold

until °F or °C appears in the

display.

4.

Press the

or

to change °F to °C or °C to °F.

5.

Press any control pad to return to normal operating

mode.

Note:

The time of day

must

first be set in order to operate the oven.

Frigidaire FGF368GB Complete Owner's Guide (English) - Page 7

Oven Control Functions, Setting Oven Controls

Page 7 highlights