Frigidaire FGGC3665KW Complete Owner's Guide (English) - Page 6
Before Setting Surface Controls
UPC - 057112102733
View all Frigidaire FGGC3665KW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
before setting surface controls Locations of the Gas Surface Burners The SIMMER burner is best used for simmering delicate sauces, etc. This burner is located at the right rear burner position. The STANDARD sized burners are used for most surface cooking needs. This burner is located at the left rear positions on the 30" & 36" cooktop (and there is one more standard burner located at the right front position on the 36" cooktop models). The POWER burner is best used for bringing large quantities of liquid rapidly up to temperature or when preparing larger quantities of food. Those burners are located at the right and left front positions on the 30" cooktop (and there is another power burner located at the center position on the 36" cooktop). Assembly of the Surface Burner Burner Caps and Burner Grates It is very important to make sure that all of the Surface Burner Caps and Surface Burner Grates are installed correctly and at the correct locations. 1 Remove all packing material from cooktop area. 2 Discard all packing material (if applicable). 3 Unpack Burner Grates and position on the cooktop (see Figure 3 or 4). REMEMBER - DO NOT ALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER MATERIAL TO ENTER THE GAS ORIFICE HOLDER OPENING. Always keep the Burner Caps and Burner Heads in place whenever the surface burners are in use. Figure 1 - 30" Model (your model may not look exactly like this one) Figure 3 - 30" Model Figure 2 - 36" Model (your model may not look exactly like this one) 6 Figure 4 - 36" Model