Frigidaire FGGF3036TD Complete Owner s Guide - Page 21

Important

Page 21 highlights

Setting the Clock When the appliance is first plugged in or when the power supply to the appliance has been interrupted, the display will flash 12:00. It is recommended to always set the clock for the correct time of day before using the appliance. To set the clock: 1. Press Set Clock once (do not hold clock key down). 2. Within 5 seconds, press and hold or until the correct time of day appears in the display. NOTE The clock cannot be changed when the oven is set for cooking or self clean is active. SETTING OVEN CONTROLS Changing between continuous bake setting or 12hour energy saving feature The oven control has a built-in 12-hour energy saving feature that will shut off the oven if the oven is left on for more than 12 hours. The oven control can be programmed to override this feature for continuous baking. To change the continuous bake setting: 1. Press and hold Timer on-off for 6 seconds until a tone sounds. - - hr will appear in the display for continuous cooking. The current time of day will return to the display. 2. To cancel the continuous bake setting, press Timer onoff and hold for 6 seconds until a tone sounds. 12 hr will appear in display indicating that the control has returned to the 12-hour energy saving feature. Temperature display (Fahrenheit/Celsius) The electronic oven control is set to operate in Fahrenheit (°F) at the factory. The oven may be programmed for any temperature from 170°F to 550°F (77°C to 288°C). To change the temperature to Celsius (°C) or from °C to °F: 1. Press Broil. - - appears in the display. 2. Press and hold until HI appears in the display. 3. Press and hold Broil until °F or °C appears in the display. 4. Press or to change °F to °C or °C to °F. To accept the change, wait 6 seconds. IMPORTANT Changing to continuous bake or 12 hour mode does not change how the cooktop controls operate. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

21
SETTING OVEN CONTROLS
Setting the Clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash
12:00
. It is recommended to always set the clock
for the correct time of day before using the appliance.
To set the clock:
1.
Press
Set Clock
once (do not hold clock key down).
2.
Within 5 seconds, press and hold
or
until
the correct time of day appears in the display.
Temperature display (Fahrenheit/Celsius)
The electronic oven control is set to operate in Fahrenheit
(°F) at the factory. The oven may be programmed for any
temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature to Celsius (°C) or from °C to
°F:
1. Press
Broil
.
— —
appears in the display.
2. Press and hold
until
HI
appears in the display.
3. Press and hold
Broil
until
°F
or
°C
appears in the display.
4. Press
or
to change °F to °C or °C to °F. To
accept the change, wait 6 seconds.
Changing between continuous bake setting or 12-
hour energy saving feature
The oven control has a built-in 12-hour energy saving
feature that will shut off the oven if the oven is left on for
more than 12 hours. The oven control can be programmed
to override this feature for continuous baking.
To change the continuous bake setting:
1.
Press and hold
Timer on-off
for 6 seconds until a tone
sounds.
— — hr
will appear in the display for contin-
uous cooking. The current time of day will return to the
display.
2.
To cancel the continuous bake setting, press
Timer on-
off
and hold for 6 seconds until a tone sounds.
12 hr
will appear in display indicating that the control has
returned to the 12-hour energy saving feature.
The clock cannot be changed when the oven is set for
cooking or self clean is active.
NOTE
Changing to continuous bake or 12 hour mode does not
change how the cooktop controls operate.
IMPORTANT