Frigidaire FGIC3066TB Product Specifications Sheet - Page 3

uts MUST be charted per individual model). ofessFBiGoUIInCLT3a-0IlN6/6CTOGBOaKllTeOrPy / Baseline 30" INDUCTION 13" max. C cabinet depth 30"min. for unprotected K cabinet 24" min. for protected cabinet 18" A B min. 4"x 8" opening to route armored cable if base is present ( G ) min. between rear edge of cutout F * and nearest combustible surface (or backsplash) above countertop * Includes clearance needed beneath cooktop to allow for armored cable and installation of junction box on back wall I 25" min. 24" Plywood base (optional) E D H ( J ) min. from edge of cutout to front edge of countertop ( H ) min. from left edge of cooktop to nearest combustible wall ( I ) min. from right edge of cooktop to nearest combustible wall PRODUCT DIMENSIONS A - Width 30-3/4" B - Depth 21-1/2" C - Height 4-3/8" CUTOUT DIMENSIONS D - Width (Min.) (Max.) 28-1/2" 29-7/8" E - Depth (Min.) (Max.) 19-5/8" 20-1/2" F - Height (Min.)* 4-1/2" REQUIRED CLEARANCES G - (Min.) 1-1/2" H - (Min.) 2" I - (Min.) 2" J - (Min.) 2-1/2" K - Cabinet Opening 30" Width (Min.) UTILITY CONNECTION LOCATIONS Power Supply Right Rear INSTALLATION SPECIFICATIONS • Product Shipping Weight (approx.) - 46 Lbs. • Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz AC only electrical supply with ground required on separate circuit fused on both sides of line. • Connected Load (kW Rating) @ 240 / 208 Volts = 7.2 / 6.2 kW • Amps @ 240 / 208 Volts = 35.0 / 35.1 Amps • Recommended Circuit Breaker - 30 Amps • Always consult local and national electric codes. • Cooktop cutout height includes clearance needed beneath cooktop to allow for armored cable and installation of junction box on back wall. Position center of junction box 10" inward from right side of cooktop cutout, and 12" down from underside of countertop. • Overhead cabinetry should not exceed a 13" maximum depth. • Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than 30". • Allow 30" minimum clearance between top of cooktop platform and bottom of unprotected wood or metal overhead cabinet; or 24" minimum clearance when bottom of wood or metal overhead cabinet is protected by not less than 1/8" flame-retardant millboard covered with not less than No. 28 MGS sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper. • Allow 1-1/2" minimum clearance between rear edge of cutout and nearest combustible surface (or backsplash) above countertop. • Allow 2" minimum required clearance from left edge of cooktop to nearest combustible wall and 2" minimum from right edge of cooktop to nearest combustible wall. • Installation of drawer not recommended beneath cooktop. • To reduce risk of fire when using overhead cabinetry, install range hood that projects horizontally a recommended minimum of 5" beyond bottom of cabinets. • Induction Built-In Cooktop model FGIC3066T is approved to be used over any Frigidaire® Electric Single Wall Oven. (Refer to Electric Cooktop Installation Over 30" / 27" Electric Single Wall Oven Specifications page on web.) OPTIONAL ACCESSORIES • Granite Countertop Installation Kit - (PN # 903061-9010). Note: For planning purposes only. Always consult local and national electric, gas and plumbing codes. Refer to Product Installation Guide for detailed installation instructions on the web at frigidaire.com / frigidaire.ca. Specifications subject to change. Accessories information available on the web at frigidaire.com / frigidaire.ca USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca FGIC3066T 02/18 © 2017 Electrolux Home Products, Inc.