Frigidaire FGID2466QD Complete Owner s Guide - Page 6

OPERATING INSTRUCTIONS Status Indicator Lights The console lights provide information about the cycle selection and current status. During operation, while the door is closed, these lights will remain on. At the completion of the cycle, the clean light will come on. The sanitization light will also come on if that option was selected and sanitization was achieved during the wash cycle. In the unlikely event that the dishwasher malfunctions, displays the error code "Uo", or gives poor performance you can call the Frigidaire Customer Care Center at 1-800-944-9044. They will be able to provide assistance in troubleshooting the problem and/or locating an authorized service technician, if needed. Status Window The STATUS window, available on some models, indicates the following activity: 1H-24H MINUTES.......... Number of delay start hours. The last hour will count down in minutes. Number of minutes left in cycle (1-199). CLOSE DOOR.... Close door will scroll one time in the status window. Console Lights If it is desired to have the console lights remain off while running, perform the following operation: Prior to starting a cycle, press and hold POWER PLUS and RINSE ONLY simultaneously for approximately 8 seconds until the corresponding lights flash. This will turn the console lights off during cycle operation. Simply repeat this operation to revert back to the previous setting. Overlay 6