Frigidaire FGID2474QF Complete Owner's Guide - Page 7

OPERATING INSTRUCTIONS Status Window The STATUS window, available on some models, indicates the following activity: 1-24 Number of delay start hours. The last hour will count down in minutes. CL Close dishwasher door. The status indicator lights will also flash to indicate current cycle status. MINUTES.......... Number of minutes left in cycle (1-199). L0----L6 Level of Rinse Aid dosage. Status Indicator Lights The CLEAN light will remain on until the door is opened. When the SANITIZE option is selected and the criteria is met, the Sanitized indicator will display and remain on until the door is opened. If the sanitization criteria is not achieved, the indicator will not display. This can happen if the cycle is interrupted or if the sanitization temperature could not be reached due to incoming water temperature significantly below 1200F. Green Light When the GREEN LIGHT illuminates on the floor this indicates that the wash cycle is complete. In the unlikely event the dishwasher malfunctions, the STATUS window may display one of the following codes: "i10" - refer to dishwasher won't run or fill and try to solve the problem "i20" - refer to dishwasher does not drain properly and try to solve the problem. If, after the check, the problem remains, or if the status window shows other error codes, contact the Frigidaire Customer Care Center at 1-800-944-9044. They will be able to provide assistance in troubleshooting the problem and/or locating an authorized service technician, if needed. 7