Frigidaire FGMC3066UF Installation Instructions - Page 5

MICROWAVE/ WALL OVEN COMBINATION INSTALLATION INSTRUCTIONS 6. Install the Anti-tip Mounting Screws The wall oven can tip when the door is open. The anti-tip mounting screws supplied with the wall oven must be installed to prevent tipping of the wall oven and injury to persons. A. The mounting holes in the side trims may be used as a template to locate the appliance mounting screw holes (see figure 6). B. Use the two screws supplied to fix the appliance to the cabinet. 7. Adjust Microwave Front Frame Screws Use a manual screwdriver to adjust the screws on the microwave front frame for a flush fit (see figure 7). ADJUST SCREWS AJUSTAR LOS TORNILLOS AJUSTER LES VIS 316106139 microwave front frame screws align micro- wave frame front to back Figure 7 Figure 6 Tip Over Hazard • A child or adult can tip the oven and be killed. • Install the anti-tip device to oven and/or structure per installation instructions. • Ensure the anti-tip device is re-engaged when the oven is moved. • Do not operate the oven without the anti-tip device in place and engaged. • Failure to follow these instructions can result in death or serious burns to children and adults. Refer to the installation instructions supplied with your appliance for proper installation. Anti-tip mounting holes Check for proper installation with a visual check that the anti-tip screws are present. Test the installation with light downward pressure on the open oven door. The oven should not tip forward. 5