Frigidaire FGQ1452HE Operating Instructions - Page 2

Cycle Selection (Con't) Note: Using No Heat in any Auto Dry cycle will result in long drying times and /or wet loads at the end of the cycle. To avoid fire hazard, do not use heat to dry items containing feathers or down, foam rubber, plastics, or similarly textured, rubber-like materials. Use the No Heat setting only. Cycle Adjustments A suitable combination of dryness level and options will automatically be displayed for each cycle. The settings can be changed before the cycle is started. Those adjustments will automatically be remembered each time that cycle is selected. If a dryness level or option is not recommened for a cycle, the indicator will not light. See the "Dryer Settings Chart" for more details. If changes are attempted after the cycle starts, the status lights will blink and the signal will beep 3 times. The cycle must be paused before the settings can be changed. Dryness Level To change the dryness level, press DRYNESS until the desired selection is made. Select Normal for most loads. Occasionally a load may seem too damp or over-dried at the end of the cycle. To increase drying time for similar loads in the future, select More Dry. For loads requiring less drying time, select Less Dry. Select Damp Dry for items you wish to partially dry before hanging or ironing. Note: To prevent over-drying, not every dryness level is available with every cycle. Options To select an option, press OPTIONS until the indicator for the desired option flashes and press Select. If an option is not available for a cycle, the indicator will not light. Follow the same steps to delete an option. The Cycle Signal will sound at the end of the cycle and periodically during Press Saver. Select Press Saver if the dried load might not be removed promptly at the end of the cycle. The dry load will continue tumbling without heat for 30 minutes to help reduce wrinkling. When the Cycle Signal is selected, a beep will be heard periodically. The load may be removed any time during Press Saver. Dryer Features (Control Lock) To avoid having someone accidentally start or stop the dryer, press OPTIONS and Select at the same time and hold for about 10 seconds until the (Control Lock) lights up. To unlock the controls, press and hold OPTIONS and Select for about 10 seconds. Status Lights The following indicators may be lighted during the cycle: • Drying • Cool Down • Press Saver • Clean Lint Filter • (Control Lock) DRYER SETTINGS CHART These temperatures, dryness levels and options are available with the following cycles: Estimated Cycle Duration *** Towels 60 minutes Normal 50 minutes Perm Press 40 minutes Delicate 20 minutes Quick ** Touch Up ** Temperatures High Medium Low recommended No Heat not recommended not recommended not recommended not recommended Dryness Level More Dry * Normal Dry * * Less Dry * Damp Dry Options Press Saver Cycle Signal * Factory setting * * * * Available settings ** Timed Dry Cycle Only * * * * *** Estimated cycle duration is based on normal dryness level and factory settings. Timed Dry 15 to 90 min*u*tes * PN 137102200 (0806)