Frigidaire FGTR2037TD Product Specifications Sheet - Page 3

Top Mount Refrigerator Specifications, Optional Accessories

Page 3 highlights

Gallery Top Mount Refrigerators FGTR2037T F / P / E 20.4 Cu. Ft. 31 3/4" 29 5/8" 69" 68 1/4" 28 1/2" 34" Top Mount Refrigerator Specifications • Product Shipping Weight (approx.) - 220 Lbs. • An electrical supply with grounded three-prong receptacle is required. The power supply circuit must be installed in accordance with current edition of National Electrical Code (NFPA 70) and local codes & ordinances. • Voltage Rating - 120V / 60 Hz • Connected Load (kW Rating) @ 120 Volts = 0.54 kW • Amps @ 120 Volts = 6.0 Amps • Always consult local and national electric & plumbing codes. • Floor should be level surface of hard material, capable of supporting fully loaded refrigerator. • Minimum 3/8" clearance required for sides and top of refrigerator with 1" clearance at rear to allow for ease of installation, proper air circulation, and plumbing / electrical connections. • When installing refrigerator adjacent to wall, cabinet or other appliance that extends beyond front edge of unit, 20" minimum clearance recommended to allow for optimum 140° door swing, providing complete crisper access and removal. (Absolute 3" minimum clearance will ONLY allow for 90° door swing which will provide limited crisper access with restricted removal.) • To ensure optimum performance, do not install in areas where temperature drops below 55° F or rises above 110° F and avoid installing in direct sunlight or close proximity to range, dishwasher or other heat source. • For proper ventilation, front grille MUST remain unobstructed. • Recess electrical outlet when possible. • Optional Ice Maker Kit (PN # IM116) available for installation in ice maker-ready models only. • Water recess on rear wall recommended to prevent water line damage. • Water Pressure - Cold water line must provide between 30 and 100 pounds per square inch (psi). • Copper tubing with 1/4" O.D. recommended for water supply line with length equal to distance from rear of unit to household water supply line plus 7 additional feet. Optional Water Supply Installation Kits available. • Adjustable front rollers to assist with door alignment. Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions. Optional Accessories • Ice Maker Kit - (PN # IM116). USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca FGTR2037T 06/17 © 2017 Electrolux Home Products, Inc. Specifications subject to change.

  • 1
  • 2
  • 3

Specifications
subject to change.
USA
10200 David Taylor Drive
Charlotte, NC 28262
1-800-FRIGIDAIRE
frigidaire.com
CANADA
5855 Terry Fox Way
Mississauga, ON L5V 3E4
1-800-265-8352
frigidaire.ca
Top Mount Refrigerators
FGTR2037T F / P / E
20.4 Cu. Ft.
FGTR2037T 06/17
© 2017 Electrolux Home Products, Inc.
Top Mount Refrigerator Specifications
Product Shipping Weight (approx.) – 220 Lbs.
An electrical supply with grounded three-prong receptacle is
required. The power supply circuit must be installed in accordance
with current edition of National Electrical Code (NFPA 70) and
local codes & ordinances.
Voltage Rating – 120V / 60 Hz
Connected Load (kW Rating) @ 120 Volts = 0.54 kW
Amps @ 120 Volts = 6.0 Amps
Always consult local and national electric & plumbing codes.
Floor should be level surface of hard material, capable of supporting
fully loaded refrigerator.
Minimum 3/8" clearance required for sides and top of refrigerator
with 1" clearance at rear to allow for ease of installation, proper air
circulation, and plumbing / electrical connections.
When installing refrigerator adjacent to wall, cabinet or other
appliance that extends beyond front edge of unit, 20" minimum
clearance recommended to allow for optimum 140° door swing,
providing complete crisper access and removal.
(Absolute 3"
minimum clearance will ONLY allow for 90° door swing which
will provide limited crisper access with restricted removal.)
To ensure optimum performance, do not install in areas where
temperature drops below 55° F or rises above 110° F and
avoid installing in direct sunlight or close proximity to range,
dishwasher or other heat source.
For proper ventilation, front grille MUST remain unobstructed.
Recess electrical outlet when possible.
Optional Ice Maker Kit (PN # IM116) available for installation in
ice maker-ready models only.
Water recess on rear wall recommended to prevent water line damage.
Water Pressure – Cold water line must provide between 30 and 100
pounds per square inch (psi).
Copper tubing with 1/4" O.D. recommended for water supply line
with length equal to distance from rear of unit to household water
supply line plus 7 additional feet. Optional Water Supply Installation
Kits available.
Adjustable front rollers to assist with door alignment.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Optional Accessories
Ice Maker Kit – (PN # IM116).
31
3
/
4
"
29
5
/
8
"
28
1
/
2
"
34"
69"
68
1
/
4
"