Frigidaire FGUS2647LF Complete Owner's Guide (English) - Page 8

handle installation CAUTION Wear gloves and use extreme CAUTION when installing these handles. The rounded end of the handles may be sharp (some models). IMPORTANT To ensure proper installation of handles, please review these instructions and illustrations thoroughly prior to installing the handles. 1. Remove handles from cartoning and any other protective packaging. 2. Position freezer handle end caps over upper and lower preinstalled shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing towards the refrigerator door. 3. While holding handle firmly against door, fasten upper and lower allen set screws (B) with supplied allen wrench. 4. Repeat steps 2 and 3 to install refrigerator handle. Ensure the holes for the set screws are facing towards the freezer door.  NOTE All set screws should be tightened and sub-flush (allen set screw should be seated just below the surface of the end cap) of handle end cap. The end caps should be drawn tight to freezer and refrigerator doors with no gaps. Frigidaire Professional® Freezer Upper End Cap Refrigerator Upper End Cap Freezer Lower End Cap Refrigerator Lower End Cap Frigidaire Gallery® Freezer Upper End Cap Refrigerator Upper End Cap Freezer Lower End Cap Refrigerator Lower End Cap 8