Frigidaire FHPC3660LS Product Specifications Sheet (English) - Page 2

Glass Canopy Island Hood FHPC3660L S 36" Stainless Steel Glass Canopy Island Hood Specifications • Product Shipping Weight (approx.) - 88 Lbs. • Island / Peninsula Ceiling-Mount Installation • Ventilation system is preset to exhaust air outside. If outside ducting is not possible, optional Duct-Free Recirculation Kit (PN # FHPRKT60LS) is available to convert ventilation to allow air to recirculate inside. (Refer to Ducted Option Specifications for outside ventilation.) • Sones Rating - 6.5 • Voltage Rating - 120V / 60 Hz / 15 Amps • Connected Load (kW Rating) @ 120 Volts = 0.52 kW (For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.) • Amps @ 120 Volts = 4 Amps • Always consult local and national electric codes. Check local building codes for installation requirements, as they may vary per locale. • Minimum installation height allowed from bottom of hood to standard 36"-high electric or gas cooking surface is 24" - 36". (NOT more than 32" recommended.) For detailed instructions regarding install heights in 8', 9' and 10' ceiling applications, refer to installation guide on web. • To prepare mounting surface, adequate structure and support must be provided, capable of supporting 150 lbs. Ducted Option Specifications • For outside ventilation. • Exhaust Duct Required - 6" round • For most efficient airflow exhaust, use a straight run or as few elbows as possible. • Use metallic flex ducting only to connect rigid duct directly to transitions (if allowed by code). • Thermal breaks such as short section of nonmetallic duct, should be used in areas of extreme cold. • Cold weather installations should have additional backdraft damper installed. • Refer to installation instructions on web for detailed exhaust duct preparation and converting vent blower system for recirculating inside. Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions. Pre-Installation Calculations • Select hood preference height (P) that is comfortable for user (24" - 36" minimum allowed, NOT more than 32" recommended). • Calculate hood height (H) for installation (H = K-C-P). • Confirm that (H) is within minimum to maximum range for hood. If not, adjust installation. • Calculate chimney structure height (S). Use formulas, check dimensions of hood. Save calculation for use later in installation. Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions. Optional Accessories • Duct-Free Recirculation Kit - (PN # FHPRKT60LS). • 10' Flue Extension Kit - (PN # FHP10X60LS). USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca FHPC3660L 02/12 © 2012 Electrolux Home Products, Inc. Accessories information available on the web at frigidaire.com Specifications subject to change.