Frigidaire FMCB115GC Use and Care Manual - Page 10
Heating with multiple cooking stages, Setting time defrost, Setting weight defrost, Adding cook time
View all Frigidaire FMCB115GC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Manual Operation Heating with multiple cooking stages Setting weight defrost For best results, some microwave recipes call for different power levels or different lengths of time for cooking. Your microwave may be set to change from one stage to another automatically (2 stages maximum). Example: to cook food for 3 minutes at 80% power and then 50% power for 6 minutes 30 seconds: 1. Press cook time. Example: to defrost 1lb. of food with the default 30% power level with cook time determined automatically: 1. Press weight defrost pad once. 0.0 will appear in the display. 2. Use the number pads to enter weight of food to defrost in pounds. You may enter weight from 0.3 to 6.3 pounds. 2. Use the number pads to enter heating time for the 1st stage (cook time may be set up to 99 minutes and 99 seconds). 3. Press power level pad once. 4. Use the number pads to enter power level for the 1st stage. PL8 appears in the display (80 % power). 5. Press cook time pad for 2nd stage. 3. Press START/+30sec pad. When defrosting has finished you will hear 5 beeps and the time of day will display. Note: The weight amount must be a valid entry for this feature to start. A valid weight entry is 0.3 to 6.3 pounds. Setting time defrost Example: to defrost food with the default 30% power level for 5 minutes: 6. Use the number pads to enter heating time for the 2nd stage (cook time may be set up to 99 minutes and 99 seconds). 7. Press power level pad for 2nd stage. 1. Press time defrost pad once. 00:00 will appear in the display. 2. Use the number pads to enter desired defrost time (defrost time may be set up to 99 minutes and 99 seconds). 8. Use the number key to enter power level for the 2nd stage. PL5 appears in the display (50 % power). 9. Press START/+30sec pad. 3. Press START/+30sec pad. When heating has finished you will hear 5 beeps and time of day will display. When heating has finished you will hear 5 beeps and the time of day will display. Adding cook time (+30sec) This time-saving feature will let you quickly add 30 seconds to any cook time already set when cooking at a 100% power level. This feature may only be used while cooking and with cook time remaining. Each press of this pad will add 30 seconds. Example: to add 1 minute of cook time at the default power level of 100%: Note: Power levels can not be changed for both time defrost and weight defrost because the defrost performance will be affected. Special notes for defrosting • After pressing START/+30sec key, the display will count down remaining defrost time. The oven will beep twice during the defrost cycle. At this time open the door and turn the food if needed and remove any portions that have already thawed. Touch the START/+30sec key to resume the defrost cycle. Press START/+30sec pad 2 times. • When heating has finished you will hear 5 beeps. 10