Frigidaire FMV157GC User Manual - Page 10

Manual Operation Heating with high power level Example: to heat for 5 minutes at 100% power: 1. Press Cook Time pad. 2. Use the number pads to enter desired heating time (cook time may be set up to 99 minutes and 99 seconds). 3. Touch STARTpad. When heating has finished you will hear 5 beeps and "Good" will display. Heating with lower power levels Using the highest power level to heat foods with does not always give the best results when some types of food need slower cooking, such as roasts, baked goods or custards. Your oven has nine other power levels you may choose. Example: to heat for 4 minutes at 70% power: 1. Press Cook Time. 2. Use the number pads to enter desired heating time (cook time may be set up to 99 minutes and 99 seconds). 3. Press Power Level pad once for power level 10 (100% power). 4. Use the number key to change the power level to 7. PL7 appears in the display (70 % power). Heating with multiple cooking stages For best results, some microwave recipes call for different power levels or different lengths of time for cooking. Your microwave may be set to change from one stage to another automatically (2 stages maximum). Example: to cook food for 3 minutes at 80% power and then 50% power for 6 minutes 30 seconds: 1. Press Cook Time. 2. Use the number pads to enter heating time for the 1st stage (cook time may be set up to 99 minutes and 99 seconds). 3. Press Power Level pad once. 4. Use the number keys to enter power level for the 1st stage. PL8 appears in the display (80 % power). 5. Press Cook Time pad for 2nd stage. 6. Use the number pads to enter heating time for the 2nd stage (cook time may be set up to 99 minutes and 99 seconds). 7. Press Power Level pad for 2nd stage. 8. Use the number key to enter power level for the 2nd stage. PL5 appears in the display (50 % power). 9. Press START pad. When heating has finished you will hear 5 beeps and "Good" will display. 5. Press START pad. When heating has finished you will hear 5 beeps and "Good" will display. Note: Power level must always be programmed for first stage - 100% =10. 10