Frigidaire FMV157GS Installation Instructions - Page 15
Installation Overview, Preparing The Rear Wall, For Outside Back Exhaust, Remove Exhaust Adaptor,
UPC - 012505558993
View all Frigidaire FMV157GS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installation Instructions B OUTSIDE BACK EXHAUST (Horizontal Duct) INSTALLATION OVERVIEW B1. Prepare Rear Wall B2. Remove Exhaust Adaptor B3. Attach Mounting Plate to Wall B4. Prepare Top Cabinet B5. Adjust Blower B6. Mount the Microwave Oven IMPORTANT NOTES: • Make sure the screws for the blower motor and blower plate are securely tightened when they are reinstalled. This will help to prevent excessive vibration. • Make sure the motor wiring has been properly routed and secured, and that the wires are not pinched. B1. PREPARING THE REAR WALL FOR OUTSIDE BACK EXHAUST You need to cut an opening in the rear wall for outside exhaust. B2. REMOVE EXHAUST ADAPTOR This microwave oven is shipped assembled for top exhaust. You will need the exhaust adaptor for installation in the rear wall opening. To remove the exhaust adaptor from the microwave oven: 1 Remove tape securing damper. 2 Raise damper flap. Blower Plate 3 Slip the damper out of the track on the blower frame by pressing and twisting both ends. Back of Microwave 4 Remove and save the screw that holds the blower plate to the microwave. Lift off the blower plate. Blower Plate • Read the instructions on the REAR WALL TEMPLATE. • Tape it to the rear wall, lining up with the holes previously drilled for holes A and B in the wall plate. • Cut the opening, following the instructions of the REAR WALL TEMPLATE. 15 Back of Microwave