Frigidaire FPBG2278UF Product Specifications Sheet - Page 3
Installation Specifications, Counter-depth French Door Refrigerator - canada
View all Frigidaire FPBG2278UF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
FPBG2278UF COUNTER-DEPTH FRENCH DOOR REFRIGERATOR 22.3 CU. FT. 27 1/8" Standard Refrigerator Depth vs. Counter Depth 36" Doors Counter Depth 23 7/8" A C B "Built-In Look" Cutout Dimensions (A) 70 1/4" (B) 36" (C) 25" Top View Recessed water line 28 3/4" Standard Depth Recessed electrical outlet 24" Cabinet Allow 1" min. clearance at rear for proper air circulation and water / electrical connections 25" Side Panels, 1/2" min. width 25" Countertop 35 7/8" Cabinet 69 7/8" with 5" 3/8" rollers 68 5/8" with 3/8" rollers Water line inlet location (left bottom rear) Power cord location (right bottom rear) 23 7/8" 42 1/2" (with doors 90° open) 29 7/8" 44 7/8" (with drawer fully extended including handle) INSTALLATION SPECIFICATIONS • Product Shipping Weight (approx.) - 347 Lbs. • An electrical supply with grounded three-prong receptacle is required. The power supply circuit must be installed in accordance with current edition of National Electrical Code (NFPA 70) and local codes & ordinances. • Voltage Rating - 120V / 60 Hz / 15 Amps • Connected Load (kW Rating) @ 120 Volts = 1.02 kW • Amps @ 120 Volts = 8.5 Amps • Always consult local and national electric & plumbing codes. • Floor should be level surface of hard material, capable of supporting fully loaded refrigerator. • Minimum 3/8" clearance required for sides and top of refrigerator or freezer with 1" clearance at rear to allow for ease of installation, proper air circulation, and plumbing / electrical connections. • When installing refrigerator adjacent to wall, cabinet or other appliance that extends beyond front edge of unit, 20" minimum clearance recommended to allow for optimum 120° to 180° door swing, providing complete drawer / crisper access and removal. (Absolute 4-1/2" minimum clearance will ONLY allow for 90° door swing which will provide drawer / crisper access with restricted removal.) • To ensure optimum performance, (do not install in areas where temperature drops below 55° F or rises above 110° F) and avoid installing in direct sunlight or close proximity to range, dishwasher or other heat source. • For proper ventilation, front grille MUST remain unobstructed. • Recess electrical outlet when possible. • Water recess on rear wall recommended to prevent water line damage. • Water Pressure - Cold water line must provide between 30 and 100 pounds per square inch (psi). • Copper or stainless steel tubing with 1/4" O.D. recommended for water supply line with length equal to distance from rear of unit to household water supply line plus 7 additional feet. Optional Water Supply Installation Kits available. • Adjustable front rollers to assist with door alignment. "BUILT-IN LOOK" SPECIFICATIONS • Minimum opening of 70-1/4" H x 36" W x 25" D required to allow for ease of installation, proper air circulation, and plumbing / electrical connections. • Remove all wall / floor molding prior to installation. Note: For planning purposes only. Always consult local and national electric, gas and plumbing codes. Refer to Product Installation Guide for detailed installation instructions on the web at frigidaire.com / frigidaire.ca. Specifications subject to change. Accessories information available on the web at frigidaire.com / frigidaire.ca USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca FPBG2278UF 9/18 © 2018 Electrolux Home Products, Inc.