Frigidaire FPEC3077RF Product Specifications Sheet - Page 3
Built-In Cooktop Specifications, Optional Accessories
View all Frigidaire FPEC3077RF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Built-In Cooktop FPEC3077RF 30" Electric A - Width 30-3/8" D - Width (min. - max.) 29-5/8" - 29-7/8" Product Dimensions B - Depth 21-3/8" Product Cutout Dimensions E - Depth (min. - max.) 20-1/4" - 20-1/2" C - Height 2-5/8" F - Height (min.)* 5" Required Clearances G (min.) H (min.) I (min.) J (min.) 2" 7-1/2" 7-1/2" 2-1/2" K - Cabinet Opening Width (min.) Utility Connection Locations Power Supply 30-3/8" Right Front Built-In Cooktop Specifications • Product Shipping Weight (approx.) - 40 Lbs. • Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz AC only electrical supply with ground required on separate circuit fused on both sides of line. • Connected Load (kW Rating) @ 240 / 208 Volts = 9.4 / 7.1 kW • Amps @ 240 / 208 Volts = 39.2 / 34.1 Amps • Recommended Circuit Breaker - 40 Amps • Always consult local and national electric codes. • Cooktop cutout height includes clearance needed beneath cooktop to allow for armored cable and installation of junction box on back wall. Position center of junction box 10" inward from right side of cooktop cutout, and 12" down from underside of countertop. • Overhead cabinetry should not exceed a 13" maximum depth. • Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than 30-3/8". • Allow 30" minimum clearance between top of cooktop platform and bottom of unprotected wood or metal overhead cabinet; or 24" minimum clearance when bottom of wood or metal overhead cabinet is protected by not less than 1/8" flame-retardant millboard covered with not less than No. 28 MGS sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper. • Allow 2" minimum clearance between rear edge of cutout and nearest combustible surface (or backsplash) above countertop.Allow 7-1/2" minimum required clearance from left edge of cooktop to nearest combustible wall and 7-1/2" minimum from right edge of cooktop to nearest combustible wall. • Installation of drawer beneath cooktop requires 4" minimum clearance beneath countertop surface, and assured clearance for electrical installation. • To reduce risk of fire when using overhead cabinetry, install range hood that projects horizontally a recommended minimum of 5" beyond bottom of cabinets. • Electric Built-In Cooktop model FPEC3077R is approved to be used over any Frigidaire® Electric Single Wall Oven. (Refer to Electric Cooktop Installation Over 30" / 27" Electric Single Wall Oven Specifications page on web.) Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions. Optional Accessories • Granite Countertop Installation Kit - (PN # 903061-9010). • Griddle - (PN # 316432200). USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca FPEC3077R 07/15 © 2015 Electrolux Home Products, Inc. Accessories information available on the web at frigidaire.com Specifications subject to change.