Frigidaire FPEW3085KF Complete Owner's Guide (English) - Page 13

Setting Minute Timer, Setting Add 1 Minute Feature, Setting Silent Control Operation

Page 13 highlights

Setting OVEN controls Setting MINUTE Timer The TIMER ON.OFF pad controls the Minute Timer feature. The Minute Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Minute Timer feature can be used during any of the other oven control functions. Refer to "Minimum and Maximum Control Pad Settings" for time amount settings. To set the Minute Timer (example for 5 minutes) 1. Press TIMER ON.OFF. "-- --" will appear and "Timer" will flash in the display. 2. Press the number pads to set the desired time in the display. 3. Press START. The time will begin to count down with "5:00" and "Timer" will stay in the display. Note: If START is not pressed the timer will return to the time of day after 25 seconds. 4. When the set time has run out, "End" and "Timer" will show in the display. The clock will sound with 3 beeps every 5 seconds until TIMER ON.OFF is pressed. To cancel the Minute Timer before the set time has run out 1. Press TIMER ON.OFF. The display will return to the time of day. Setting Add 1 Minute Feature (some models) The ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the ADD 1 MINUTE pad is pressed, 1 minute is added to the Minute Timer feature if this feature is already active. If the Minute Timer feature is not active and the ADD 1 MINUTE pad is pressed, the Minute Timer feature will become active and will begin counting down from 1 minute. Setting Oven Lockout Feature The pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents the oven from being turned on. It does not disable the clock, Minute Timer or the interior oven lights. To activate the Oven Lockout feature 1. Press and hold for 3 seconds. 2. After 3 seconds "door Loc" will appear, a beep will sound and "DOOR" and will flash in the display. Once the oven door is locked the "DOOR" and indicators will stop flashing and remain on along with the "Loc". To reactivate normal oven operation: 1. Press and hold for 3 seconds. After 3 seconds "door OPn" will appear and a beep will sound. The "DOOR" and will flash in the display until the oven door has completely unlocked 2. The oven is again fully operational. Setting Silent Control Operation The DELAY START and SELF CLEAN pads control the Silent Control operation feature. The Silent Control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps. To change control from normal sound operation to silent control operation 1. To tell if your range is set for normal or silent operation press and hold DELAY START. "-- --" will appear and "DELAY" will flash in the display. After 6 seconds "bEEP On" or "bEEP OFF" will appear in the display. 2. Press SELF CLEAN to switch between normal sound operation and silent operation mode. The display will show either "bEEP On" or "bEEP OFF". Note: If "bEEP On" appears, the control will operate with normal sounds and beeps. If "bEEP OFF" appears, the control is in the silent operation mode. 3. Press START to accept the change or press CANCEL to reject the change. Note: The control will always beep at the end of a minute timer and will beep when a set temperature has been reached, even if the control is set to silent operation. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

13
SETTING OVEN CONTROLS
SETTING MINUTE TIMER
The
TIMER ON
.
OFF
pad controls the Minute Timer
feature. The Minute Timer serves as an extra timer in
the kitchen that will beep when the set time has run
out.
It does not start or stop cooking. The Minute Timer
feature can be used during any of the other oven control
functions. Refer to “Minimum and Maximum Control Pad
Settings” for time amount settings.
To set the Minute Timer
(example for 5 minutes)
1. Press
TIMER ON
.
OFF.
-- --
” will appear and
Timer
” will flash in the display.
2.
Press the number pads to set the desired time in the
display.
3. Press
START
. The time will begin to count down with
5:00
” and “
Timer
” will stay in the display.
Note: If
START
is not pressed the timer will return to the
time of day after 25 seconds.
4.
When the set time has run out, “
End
” and “
Timer
will show in the display. The clock will sound with
3 beeps every 5 seconds until
TIMER ON
.
OFF
is
pressed.
To cancel the Minute Timer before the set time has
run out
1. Press
TIMER ON
.
OFF
. The display will return to the
time of day.
SETTING ADD 1 MINUTE FEATURE
(some
models)
The
ADD 1 MINUTE
pad is used to set the Add 1 Minute
feature. When the
ADD 1 MINUTE
pad is pressed,
1 minute is added to the Minute Timer feature if this
feature is already active. If the Minute Timer feature is
not active and the
ADD 1 MINUTE
pad is pressed, the
Minute Timer feature will become active and will begin
counting down from 1 minute.
SETTING OVEN LOCKOUT FEATURE
The
pad controls the Oven Lockout feature. The Oven
Lockout feature automatically locks the oven door and
prevents the oven from being turned on. It does not disable
the clock, Minute Timer or the interior oven lights.
To activate the Oven Lockout feature
1. Press and hold
for 3 seconds.
2.
After 3 seconds “
door
Loc
” will appear, a beep will sound
and “
DOOR
” and
will flash in the display. Once the
oven door is locked the “
DOOR
” and
indicators will
stop flashing and remain on along with the “
Loc
”.
To reactivate normal oven operation:
1.
Press and hold
for 3 seconds. After 3 seconds “
door
OPn
” will appear and a beep will sound. The
DOOR
and
will flash in the display until the oven door has
completely unlocked
2.
The oven is again fully operational.
SETTING SILENT CONTROL OPERATION
The
DELAY START
and
SELF CLEAN
pads control the
Silent Control operation feature. The Silent Control operation
feature allows the oven control to be operated without
sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned
to operating with all the normal sounds and beeps.
To change control from normal sound operation to
silent control operation
1.
To tell if your range is set for normal or silent operation
press and hold
DELAY START
. “
-- --
” will appear and
DELAY
” will flash in the display.
After 6 seconds “
bEEP
On
” or “
bEEP OFF
” will appear in the display.
2. Press
SELF CLEAN
to switch between normal sound
operation and silent operation mode. The display will
show either “
bEEP On
” or “
bEEP OFF
”.
Note: If “
bEEP On
” appears, the control will operate with
normal sounds and beeps.
If “
bEEP OFF
” appears,
the control is in the silent operation mode.
3. Press
START
to accept the change or press
CANCEL
to reject the change.
Note:
The control will always beep at the end of a minute
timer and will beep when a set temperature has been reached,
even if the control is set to silent operation.