Frigidaire FPGC3087MS Product Specifications Sheet (English) - Page 3

Built-In Cooktop Specifications, Optional Accessories - dimensions

Page 3 highlights

Built-In Cooktop FPGC3087M S 30" Gas A - Width 30" D - Width (min. - max.) 27-1/4" - 28-1/2" Product Dimensions B - Depth 21-3/4" Product Cutout Dimensions E - Depth (min. - max.) 19-1/8" - 19-3/4" C - Height 4-1/4" F - Height (min.)* 8" Required Clearances G (min.) H (min.) I (min.) J (min.) 2-1/2" 9" 9" 2-1/4" K - Cabinet Opening Width (min.) Utility Connection Locations Power Supply Gas Supply 30" Right Rear Right Rear Built-In Cooktop Specifications • Product Shipping Weight (approx.) - 55 Lbs. • Voltage Rating - 120V / 60 Hz / 15 Amps • For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation. • Amps @ 120 Volts = 1.0 Amps • Always consult local and national electric and gas codes. • Cooktop cutout height includes clearance needed beneath cooktop to allow for gas supply connection. Recommended location for grounded 120V outlet is on rear wall in an 8"-wide by 10"-high area, positioned 22" above floor surface and 4" from right side of cooktop centerline. Access to underside of cooktop and junction box must be provided for inspection and service. • Cooktop ships with 3/4" factory regulator. • LP Gas conversion kit supplied. • Overhead cabinetry should not exceed a 13" maximum depth. • Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than 30". • Allow 30" minimum clearance between top of cooktop platform and bottom of unprotected wood or metal overhead cabinet. • Allow 2" minimum distance between rear edge of cutout and adjacent combustible surface (or backsplash). • Allow 9" minimum required clearance from left edge of cooktop to adjacent combustible surface and 9" minimum from right edge of cooktop to adjacent combustible surface. • Installation of drawer beneath cooktop requires 6-1/2" minimum clearance beneath countertop surface, and assured clearance for gas and electrical connections. • To reduce risk of fire when using overhead cabinetry, install range hood that projects horizontally a recommended minimum of 5" beyond bottom of cabinets. • Gas Built-In Cooktop model FPGC3087M is approved to be used over any Frigidaire® Electric Single Wall Oven. (Refer to Gas Cooktop Installation Over 30" / 27" Electric Single Wall Oven Specifications page on web.) Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions. Optional Accessories • Granite Countertop Installation Kit - (PN # 903103-9010). USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca FPGC3087M 05/12 © 2012 Electrolux Home Products, Inc. Accessories information available on the web at frigidaire.com Specifications subject to change.

  • 1
  • 2
  • 3
  • 4
  • 5

Accessories information available
on the web at
frigidaire.com
USA
10200 David Taylor Drive
Charlotte, NC 28262
1-800-FRIGIDAIRE
frigidaire.com
CANADA
5855 Terry Fox Way
Mississauga, ON L5V 3E4
1-800-265-8352
frigidaire.ca
FPGC3087M 05/12
© 2012 Electrolux Home Products, Inc.
Specifications
subject to change.
Built-In Cooktop
FPGC3087M S
30" Gas
Built-In Cooktop Specifications
Product Shipping Weight (approx.) – 55 Lbs.
Voltage Rating – 120V / 60 Hz / 15 Amps
For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.
Amps @ 120 Volts = 1.0 Amps
Always consult local and national electric and gas codes.
Cooktop cutout height includes clearance needed beneath cooktop
to allow for gas supply connection. Recommended location for
grounded 120V outlet is on rear wall in an 8"-wide by 10"-high area,
positioned 22" above floor surface and 4" from right side of cooktop
centerline. Access to underside of cooktop and junction box must
be provided for inspection and service.
Cooktop ships with 3/4" factory regulator.
LP Gas conversion kit supplied.
Overhead cabinetry should not exceed a 13" maximum depth.
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than 30".
Allow 30" minimum clearance between top of cooktop platform and
bottom of unprotected wood or metal overhead cabinet.
Allow 2" minimum distance between rear edge of cutout and adjacent
combustible surface
(or backsplash)
.
Allow 9" minimum required clearance from left edge of cooktop to
adjacent combustible surface and 9" minimum from right edge of
cooktop to adjacent combustible surface.
Installation of drawer beneath cooktop requires 6-1/2" minimum
clearance beneath countertop surface, and assured clearance for gas
and electrical connections.
To reduce risk of fire when using overhead cabinetry, install range
hood that projects horizontally a recommended minimum of 5"
beyond bottom of cabinets.
Gas Built-In Cooktop model FPGC3087M is approved to be used
over any Frigidaire® Electric Single Wall Oven.
(Refer to Gas Cooktop
Installation Over 30" / 27" Electric Single Wall Oven Specifications
page on web.)
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Optional Accessories
Granite Countertop Installation Kit – (PN # 903103-9010).
Product Dimensions
Required Clearances
A
- Width
B
- Depth
C
- Height
G
(min.)
H
(min.)
I
(min.)
J
(min.)
30"
21-3/4"
4-1/4"
2-1/2"
9"
9"
2-1/4"
Product Cutout Dimensions
K
- Cabinet Opening Width
(min.)
Utility Connection Locations
D
- Width (min. - max.)
E
- Depth (min. - max.)
F
- Height (min.)*
Power Supply
Gas Supply
27-1/4" - 28-1/2"
19-1/8" - 19-3/4"
8"
30"
Right Rear
Right Rear